Reachable: Not yet

Kai Beginner Joined: 24 Jan 2012 Posts: 3

Is your network reachable? Not yet
Are you using a router?
Did you set a static IP on the PC running Kai? Yes
Did you forward port 30000 to the static IP? Yes
Did you click the globe after forwarding to see if your network goes reachable? N/A
What console are you using? Xbox
Is your console being detected? Yes
Brief description of your network setup: Router
Model numbers of the router, and modem? BTHomeHub 1.5
Do you use a software firewall? What brand? Have you made any changes to it? No
Operating System? Windows 7
Problem description? Still says not yet reachable

# XLink Kai Engine Configuration
# Version 7.4.23

[KaiUserConfig]

# Username for automatic login
kaiUsername=!

# Password for automatic login
kaiPassword=!

# Use automatic login
kaiAutoLogin=0

# Use Web User Interface instead of GUI program
kaiWebUI=1

# Automatically launch Kai user interface
kaiLaunchUI=1

# User interface program name
kaiUI=kaiUI.exe

# Web UI Password
kaiHTTPPassword=!

# Web UI Skin
kaiSkin=!

# Automatically open chat
kaiAutoOpenChat=0

# Enable PSP Mode (Automatic SSID detection)
kaiPSPMode=0

# Disable sleep mode
kaiDisableSleep=0

# MBCS code page for asian character sets
kaiCodepage=0

# Language
kaiLanguage=en

# Enable port address translation
kaiPAT=0

# Set UDP port for peer-to-peer connections (0=random)
kaiPort=30000

# Set UDP port for deep connections (0=disable)
# Do not enable this unless you are sure that you require deep resolution
kaiDeepPort=0

# Set TCP port for Web UI connections (connect with http://127.0.0.1:[portnumber]/)
# Default is 34522 - this does not need to be changed in most cases. You DO NOT need to forward this port in your router.
kaiWebUIPort=34522

# Use PSSDK or Winpcap
kaiLib=pssdk

# Autodetect Proxy Server
kaiProxyAutoDetect=1

# Proxy server IP address
kaiProxyServer=!

# Proxy server port
kaiProxyPort=0

# Network adapter (!=autodetect)
kaiAdapter=!

# Automatically shut down engine after x minutes (0=never)
kaiTimeout=0

# Automatically shut down engine when UI closes
kaiUIClose=1

# Accept connections from user interfaces on other computers
kaiAcceptRemote=0

Team XLink Moderator Joined: 27 Feb 2011 Posts: 1201

Did you check if the 30000 upd port is open ? Heres a tool to do so http://portforward.com/help/portcheck.htm and heres an manual to port forward http://www.filesaveas.com/bthomehub_portforwarding.html hope it might help. Just to be clear xbox or xbox 360 ?

Posted: Thu Jan 26, 2012 12:04 am

The BT HomeHub is the issue here, a lot of user in the past have spent weeks trying to get this poor designed router to open its ports without any success, it would be more beneficial if you bought a Netgear or Linksys router which take mare seconds to open ports in.

Kai Beginner Joined: 24 Jan 2012 Posts: 3

I've checked using that application and the port is definitely open, yet it still says "not yet".
P.s. Original Xbox

Team XLink Moderator Joined: 27 Feb 2011 Posts: 1201

Have you setup everything like in this pic ? http://www.teamxlink.co.uk/img/networksetup_router.png and have you tried running kai with your firewall disabled ?

Kai Beginner Joined: 24 Jan 2012 Posts: 3

giggyprince wrote:

Have you setup everything like in this pic ? http://www.teamxlink.co.uk/img/networksetup_router.png and have you tried running kai with your firewall disabled ?

Yep, tried without firewall, setup like the picture but still nothing.

Team XLink Moderator Joined: 27 Feb 2011 Posts: 1201

Do you have the latest router firmware installed ? To check which firmware version your BT Home Hub 1.5 is running, click on the Hub Manager icon on your computer desktop. Alternatively you can open your web browser, type bthomehub.home into the address bar and press Enter.
Scroll down to the bottom of the home page - the software version is shown in the bottom left of the screen, for example 6.2.6.E. And is your NAT status open ?