Trouble with usb setup

Kai Beginner Joined: 18 Mar 2012 Posts: 3

Alright. Scouring the internet has left me a bit dazed. I have found similar topics, but none that seem to match up to my problem just right. I will go through each program and tell you what I've done.

For the overall tutorial. I have followed this:
http://www.teamxlink.co.uk/forum/viewtopic.php?t=39586

I have installed everything that the tutorial has required of me. There are no yellow triangles.

My metrics are as follows:
orbital name: Planex DC2
reachable: Not Yet
local ip: 182.249.16.181
local port: 30000
engine version: 7.4.24
pssdk/winpcap: Windows/Winpcap
signed by: team xlink
ethernet adapter: Microsoft
locked: 1
up engine traffic: 0
down engine traffic: 0
up chat traffic: 0
down chat traffic: 0
up orb traffic: 0
down orb traffic: 0
pssdk/winpcap (again?): Winpcap
mac cache entrie: 0
broadcast traffic inbound: 0
broadcast traffic outbound: 0
unicast traffic inbound: 0
unicast traffic outbound: 0
wireless SSID:

Found Consoles:
NONE

And my bridge.exe screencap:

Been racking my brain... Thanks in advance for any help. OS is Windows 7 32bit

Team XLink Moderator Joined: 27 Feb 2011 Posts: 1201

Your bridge.exe looks fine it detects your psp, drivers are installed as well. Did you portforward port 30000 udp ? Are there any programs that might interfere with kai security/privacy software ? Could you post your config ?

Team XLink Administrator Joined: 02 Jul 2006 Posts: 965

Yeah giggy's diagnosis looks right, it's probably a port forwarding issue. Find your routers model no. and follow the guide from here: http://www.portforward.com

If you forward the right ip address to the right ports, and you still get the 'Reachable - Not Yet' reading, try unchecking the 'Enable PAT' option in your Kai Configuration. Restart Kai completely and see what happens...

Kai Beginner Joined: 18 Mar 2012 Posts: 3

Thanks to the both of you. I am using an HTC smartphone to connect to the internet through Wifi Tethering. I am currently looking up a program or app that will allow me to portforward through to the xlink kai server. I may have found something, but it requires a "username@hostname:port" address.

My xlink kai config:

If there is anything else I can provide, let me know.

*Edit*

I also tried unchecking what you suggested, Hawk. No dice.

Team XLink Moderator Joined: 27 Feb 2011 Posts: 1201

I dont know if i get your setup right your htc is a wifi hotspot not physically connected (usb) and your PC/Laptop connects through it via wifi (card or adapter). If that might be the case then i would try, usb tethering this should spare you the forwarding of any ports.

Kai Beginner Joined: 18 Mar 2012 Posts: 3

Ah, I apologize. Yes, that is the setup I am currently using. The only problem is that I can't set up the USB tethering without gaining more charges to my data plan.

I will be getting a router this week to hook up the internet from a service provider. If it comes down to it, I will just wait it out and do it that way.