Planex GW USNANO driver problem.

Kai Beginner Joined: 21 Oct 2009 Posts: 14

I go into Client Manager Connect Wizard > Play Game > Connect with XLink Kai and I get this.

I have tried running in XP SP2 and Vista SP2 and run it as Admin.

Everything else works. I got Win7x64 Xlink driver installed and Xlink activated. The only problem is this Client Manager.

Anyone know how to fix this or if an alternate client can be used?

Team XLink Moderator Joined: 27 Feb 2011 Posts: 1201

Run regedit.exe and go to HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Ndisuio
and check that the "Start" Value is set to 1, 2 or 3 (I set it to 1)
Just to make sure scan your computer for malware with "malwarebytes anti-malware" and "superantispyware". Hope this will solve your problem.

Kai Beginner Joined: 21 Oct 2009 Posts: 14

It was set to 3 I set it to 1.
I also cleared my comp of crud [thanks for superantispyware hadn't heard of that and it really good!] and the client still doesn't work.

Do you know if there is another client that USNano will work with?

Does it matter that my router has a passcode?

Team XLink Moderator Joined: 27 Feb 2011 Posts: 1201

Uninstall the planex wifi client not the driver and use the standard windows 7 client. The one that looks like this http://ts4.mm.bing.net/images/thumbnail.aspx?q=4705184433373675&id=1b47caaa06b9bbd99c9d8822e603330b&url=http%3a%2f%2fwww.zdnet.co.uk%2fi%2fz5%2frv%2f2008%2f10%2fwin7_wifi.jpg

Kai Beginner Joined: 21 Oct 2009 Posts: 14

I can't see the adapter in the connect window shown in the pic you posted.

Team XLink Moderator Joined: 27 Feb 2011 Posts: 1201

Start kai go to the arena of the game you want to play. Start the game you want to play go to the online lobby in the game now rightclick on the taskbar where the wifi/internet symbol is next to the time now choose connect to a network hit refresh until you get a network with the name "psp_aul...........and so on" connect to it and you should be able to play your game.

Kai Beginner Joined: 21 Oct 2009 Posts: 14

I've been refreshing every few seconds for ten minutes and it still didn't show up. Is this right...

orbital name: TX Montreal
reachable: Yes
local ip: 24.253.116.134
local port: 30000
engine version: 7.4.24
pssdk/winpcap: Windows/PSSDK
signed by: team xlink
ethernet adapter: No Traffic Yet
locked: 0
up engine traffic: 0
down engine traffic: 0
up chat traffic: 0
down chat traffic: 0
up orb traffic: 0
down orb traffic: 0
pssdk/winpcap (again?): PSSDK
mac cache entrie: 0
broadcast traffic inbound: 0
broadcast traffic outbound: 0
unicast traffic inbound: 0
unicast traffic outbound: 0
wireless SSID:

Team XLink Moderator Joined: 27 Feb 2011 Posts: 1201

You need to pick your wireless adapter in the kai config as network adapter not your ethernet adapter. Then it should work as described in my previous post.

Kai Beginner Joined: 21 Oct 2009 Posts: 14

Still nothing. I have this now. I noticed it says locked: 1 now when it was 0 before.

reachable: Yes
local ip: 24.253.116.134
local port: 30000
engine version: 7.4.24
pssdk/winpcap: Windows/PSSDK
signed by: team xlink
ethernet adapter: GW-USNano
locked: 1
up engine traffic: 0
down engine traffic: 0
up chat traffic: 0
down chat traffic: 0
up orb traffic: 0
down orb traffic: 0
pssdk/winpcap (again?): PSSDK
mac cache entrie: 0
broadcast traffic inbound: 0
broadcast traffic outbound: 0
unicast traffic inbound: 0
unicast traffic outbound: 0
wireless SSID:

Team XLink Moderator Joined: 27 Feb 2011 Posts: 1201

It looks all good have you enabled the psp xlink mode for your planex ? Go to device manager and righclick and choose properties of your adapter --> http://img11.imageshack.us/img11/8320/bild8.gif

Kai Beginner Joined: 21 Oct 2009 Posts: 14

Yeah PSP XLink Mode is enabled but what about 802.11d [disabled] Beacon Interval [100] Wireless Mode [IEEE 802.11b/g/n].
Is all the right?

Team XLink Moderator Joined: 27 Feb 2011 Posts: 1201

Just PSP Xlink mode and Radio ON/OFF have to be enabled.

Kai Beginner Joined: 21 Oct 2009 Posts: 14

I only have the four options I posted.... no radio option.

Team XLink Moderator Joined: 27 Feb 2011 Posts: 1201

Quote:

Start kai go to the arena of the game you want to play. Start the game you want to play go to the online lobby in the game now rightclick on the taskbar where the wifi/internet symbol is next to the time now choose connect to a network hit refresh until you get a network with the name "psp_aul...........and so on" connect to it and you should be able to play your game.

It should work now all looks good so far. If you still can not connect to an adhoc network with psp_aul in it i suggest you unstall the driver and reinstall it like in these instructions--> http://www.planex.net/pdf/wireless/gw-usnano/v1/html/menu-1-2.html

Kai Beginner Joined: 21 Oct 2009 Posts: 14

It's still not working and I think I know what's wrong but I don't know how to fix it.
Under 'Manage Wireless Networks' it tells me 'Wireless is not currently enabled.'. I read someone's post while searching for a solution and they were told to flip the on switch of their wireless adapter... am I supposed to push the button on the adapter? I have tried that but maybe I'm doing it wrong? I can't find the instruction book that came with the adapter.

Also I get this in while in 'Change adapter settings' in network and sharing.

That was taken while in XLink and in online lobby in game with Win 7 x64 XLink driver reinstalled, xlink mode enabled, reachable in XLink.

Edit: Here's the advanced tab of the adapter just in case this is it. There's no radio option.

And thank you so much for your help so far.

Team XLink Moderator Joined: 27 Feb 2011 Posts: 1201

Maybe the wlan autoconfig service is turned off i suggest you check if it is enabled heres a tutorial on how to do it--> http://www.home-network-help.com/wlan-autoconfig-service.html

Kai Beginner Joined: 21 Oct 2009 Posts: 14

Thank you so much!!
Wlan was on auto but when I pressed start it gave me an error, googled and found out that it may have been a disabled service in msconfig. I go through there when I install something that bogs my computer down and disable it so I enabled all and now even the client manager works!

Thank you so much! If not for you I would be at this for weeks!

Team XLink Moderator Joined: 27 Feb 2011 Posts: 1201

Have fun playing

Kai Beginner Joined: 21 Oct 2009 Posts: 14

Thank you I'm havin a blast! Very Happy