Can't see other players in MHP3rd

Kai Beginner Joined: 24 Apr 2012 Posts: 2

Is your network reachable? Yes
Are you using a router? Yes
Did you set a static IP on the PC running Kai? Yes
Did you forward port 30000 to the static IP? Yes
Did you click the globe after forwarding to see if your network goes reachable? If the globe is the XLink logo, yes I did
What console are you using? Sony PSP 3000 with CFW 6.20 PRO B8
Is your console being detected? Yes
Brief description of your network setup: PSP connected to the laptop via USB and laptop to the internet via wireless
Model numbers of the router, and modem?
Do you use a software firewall? What brand? Have you made any changes to it? all firewalls disabled
Operating System? Windows 7
Problem description? whenever I get into the gathering hall, I can't see any other players

Team XLink Moderator Joined: 27 Feb 2011 Posts: 1206

Do you use a 64 bit win 7 and have you disabled driversignature enforcement ? If not here--> http://www.ngohq.com/home.php?page=dseo ddl link is broken heres a new one--> http://www.softpedia.com/get/Tweak/Video-Tweak/Driver-Signature-Enforcement-Overrider.shtml
Have you ever you used a spoofing program ? If yes here--> http://www.teamxlink.co.uk/forum/viewtopic.php?t=42661

Kai Beginner Joined: 24 Apr 2012 Posts: 2

yes, I do use win 7 64bit
however I DID download that signature enforcement disabler just in case before
and never used any spoofing program and my MAC address on the PSP is perfectly normal ._.

doesn't help that people are harsh on you when you try to join a channel to test out your unsuccessful setup

yet, as far as I have tested, I could not see anyone in guild halls

Team XLink Moderator Joined: 27 Feb 2011 Posts: 1206

Do you use the right version of the plugin there are 4 and did you activate it ? If you have remote joy lite disable it it interferes with the adhoctousb plugin.

Team XLink Administrator Joined: 02 Jul 2006 Posts: 965

Aside from any other problems you might be having, you will need the Loopback Adapter set as your 'Network Adapter' in Kai Config. If the loopback adapter doesn't show up as a selectable adapter then it can't have installed properly...