Help request XlinkKai lOllO2313

Kai Beginner Joined: 15 Jun 2012 Posts: 3

Is your network reachable? Not yet (lol, that's the problem)
Are you using a router? Yeah
Did you set a static IP on the PC running Kai? Yes
Did you forward port 30000 to the static IP? I think yes, but I have my doubts
Did you click the globe after forwarding to see if your network goes reachable? ? Do you mean if i check if i go reachable after had forward port 30000? Yes
What console are you using? PSP, Monster hunter 3rd
Is your console being detected? Correctly
Brief description of your network setup: I can't understand this point... do u mean how Im online? I only use a wireless router
Model numbers of the router, and modem? Lynksys Wag320N
Do you use a software firewall? What brand? Have you made any changes to it? No, i just turn off Windows Firewall and Avira, just in case.
Operating System? Windows Seven Ulltimate
Problem description? I cant find a stable configuration, in 3 days i played just 2 times, and after the psp' disconnection i was not reachable again.

Code:

# XLink Kai Engine Configuration
# Version 7.4.24

[KaiUserConfig]

# Username for automatic login
kaiUsername=lOllO2313

# Password for automatic login
kaiPassword=

# Use automatic login
kaiAutoLogin=1

# Use Web User Interface instead of GUI program
kaiWebUI=1

# Automatically launch Kai user interface
kaiLaunchUI=1

# User interface program name
kaiUI=kaiUI.exe

# Web UI Password
kaiHTTPPassword=!

# Web UI Skin
kaiSkin=!

# Automatically open chat
kaiAutoOpenChat=0

# Enable PSP Mode (Automatic SSID detection)
kaiPSPMode=0

# Disable sleep mode
kaiDisableSleep=1

# MBCS code page for asian character sets
kaiCodepage=0

# Language
kaiLanguage=en

# Enable port address translation
kaiPAT=1

# Set UDP port for peer-to-peer connections (0=random)
kaiPort=30000

# Set UDP port for deep connections (0=disable)
# Do not enable this unless you are sure that you require deep resolution
kaiDeepPort=0

# Set TCP port for Web UI connections (connect with http://127.0.0.1:[portnumber]/)
# Default is 34522 - this does not need to be changed in most cases. You DO NOT need to forward this port in your router.
kaiWebUIPort=34522

# Use PSSDK or Winpcap
kaiLib=pssdk

# Autodetect Proxy Server
kaiProxyAutoDetect=1

# Proxy server IP address
kaiProxyServer=!

# Proxy server port
kaiProxyPort=0

# Network adapter (!=autodetect)
kaiAdapter=\Device\{6948472E-BF4B-4E64-9FC9-160483A17DA5}

# Automatically shut down engine after x minutes (0=never)
kaiTimeout=0

# Automatically shut down engine when UI closes
kaiUIClose=1

# Accept connections from user interfaces on other computers
kaiAcceptRemote=1

Sorry for bad english. Also, I couldnt check if the 30000 port is open, any of you can suggest me a software? I tryed this one, OpenPortCheck (here http://portforward.com/help/portcheck.htm ), but it crash at installation.

Download for zoom

Team XLink Moderator Joined: 27 Feb 2011 Posts: 1201

Heres a port tester--> http://www.pcwintech.com/simple-port-tester uncheck the PAT option in your kai config. Sometimes the network goes rechable when your in the online lobby of the game. If everything isnt working switch from webUI to the progUI in some cases it helped.

Kai Beginner Joined: 15 Jun 2012 Posts: 3

Thanks for the help, i'll try the program now

If i choose ProgUI it dont start: it continue to say "Looking fot Kai engine..." but it doesnt move.

Sometimes the network goes rechable when your in the online lobby of the game. Do you mean that I'll be reacheble only if Im in the Arena with the PSP logged in the "multyplayer zone of the game"? If yes, i know it

I tryed the program, the result...is this.

...what did I do wrong?

Team XLink Moderator Joined: 27 Feb 2011 Posts: 1201

Go to your routers firewall settings and turn off "Block Anonymous Internet Requests"--> http://screenshots.portforward.com/routers/Linksys/WAG320N/Firewall.htm

Kai Beginner Joined: 15 Jun 2012 Posts: 3

I tried it, but it still doesnt work. Today, checkin the port with the program, it said Succeded, i tried Kai and it still has not worked; I re-checked the port and now it says Failed again. ???

Team XLink Moderator Joined: 27 Feb 2011 Posts: 1201

Instead of doing a "port ranged forwarding" use the "single port forwarding" tab of your router and port forward port 30000 UDP only. Enter 30000 for ex/internal port and leave "Block Anonymous Internet Requests" off.