I cant configure or start kai.

Kai Beginner Joined: 26 Jun 2012 Posts: 13

i cant configure or start kai with "configure kai" and "start kai" but the "start user interface" works perfectly well.
when i try to configure or start kai an error message appears saying:
"http://127.0.0.1:34522/config.html" error:
"windows cant find the archive 'http://127.0.0.1:34511/config.html'. make sure that the route and name of the archive are written correctly and try again. to search for the archive click the start button and select find."
i have tried re-installing many times and it has not fixed this. please help?

im using windows xp.

Team XLink Moderator Joined: 27 Feb 2011 Posts: 1201

Follow this guide here--> http://teamxlink.co.uk/forum/viewtopic.php?t=32242&sid=b34ceb5004ff4c034877884db6ed8a97 or use geekuninstaller--> http://www.geekuninstaller.com/ Reinstall kai and install microsoft visual c++ 2010 this should fix it.

Kai Beginner Joined: 26 Jun 2012 Posts: 13

giggyprince wrote:

Follow this guide here--> http://teamxlink.co.uk/forum/viewtopic.php?t=32242&sid=b34ceb5004ff4c034877884db6ed8a97 or use geekuninstaller--> http://www.geekuninstaller.com/ Reinstall kai and install microsoft visual c++ 2010 this should fix it.

It didn't work... Crying or Very sad

Team XLink Administrator Joined: 05 May 2008 Posts: 1431

follow this tut http://www.teamxlink.co.uk/forum/viewtopic.php?t=32242
make sure you arent running any software firewall

Team XLink Moderator Joined: 27 Feb 2011 Posts: 1201

Could you post your kai config its located in

-Windows Vista/7: C:\Users\%user%\AppData\Roaming\kaiuserconfig.txt
-Windows XP: C:\Documents and Settings\%user%\Application Data\kaiuserconfig.txt

you can even manually change the config by changing the values in the document.

Kai Beginner Joined: 26 Jun 2012 Posts: 13

giggyprince wrote:

Could you post your kai config its located in

-Windows Vista/7: C:\Users\%user%\AppData\Roaming\kaiuserconfig.txt
-Windows XP: C:\Documents and Settings\%user%\Application Data\kaiuserconfig.txt

you can even manually change the config by changing the values in the document.

i looked for the "%user%" folder, and it isn't there, i found: "All Users" (app data wasn't there). i also found "Samsung" and inside was "application data", but not the "kaiuserconfing.txt". i think because i never really got to that part, cause my problem is that i cant run "start kai" and "configure kai", i keep getting "http://127.0.0.1:34522/" error message, then it closes.

Team XLink Moderator Joined: 27 Feb 2011 Posts: 1201

This might solve your issue of not finding the appdata folder--> http://www.sevenforums.com/tutorials/394-hidden-files-folders-show-hide.html

Kai Beginner Joined: 26 Jun 2012 Posts: 13

giggyprince wrote:

This might solve your issue of not finding the appdata folder--> http://www.sevenforums.com/tutorials/394-hidden-files-folders-show-hide.html

i tried it. seems that i never had that folder, i only hve it on "samsung" folder, but the "%user%" and the files u mentioned arent there...
i think that maybe you or anione else could give me a copy of the file?

Kai Regular Joined: 02 Jan 2006 Posts: 83

Is your user name "samsung" in your Windows?
If yes, open a Command Prompt and type the following command:

Code:

notepad C:\Documents and Settings\samsung\Application Data\XLink Kai\KaiUserConfig.txt

Thanks

Team XLink Moderator Joined: 27 Feb 2011 Posts: 1201

Have you redownloaded the the latest version of kai ? Maybe your last downloaded and installed version was corrupted or not completely downloaded. Always download the latest kai build on the official homepage nowhere else.

Kai Beginner Joined: 26 Jun 2012 Posts: 13

karmic wrote:

Is your user name "samsung" in your Windows?
If yes, open a Command Prompt and type the following command:

Code:

notepad C:\Documents and Settings\samsung\Application Data\XLink Kai\KaiUserConfig.txt

Thanks

it says data missing or not found or something like that...
also, i have countlesly downloaded xlink kai many times, from http://www.teamxlink.co.uk/ at the downloads section.

Kai Regular Joined: 02 Jan 2006 Posts: 83

Akaa, can you capture the outputs of the following commands?

After opening a command prompt, type this command:

Code:

cd "C:\Documents and Settings"
dir /b /a

And then type this command:

Code:

dir /b /s KaiUserConfig.txt

You may substitute keyword (e.g. dir /b /s *xlink*).

Thanks

Kai Beginner Joined: 26 Jun 2012 Posts: 13

karmic wrote:

Akaa, can you capture the outputs of the following commands?

After opening a command prompt, type this command:

Code:

cd "C:\Documents and Settings"
dir /b /a

And then type this command:

Code:

dir /b /s KaiUserConfig.txt

You may substitute keyword (e.g. dir /b /s *xlink*).

Thanks

it worked! seems that it is in another hidden folder with a different name...
here is KaiUserConfig.txt:

# XLink Kai Engine Configuration
# Version 7.4.24

[KaiUserConfig]

# Username for automatic login
kaiUsername=!

# Password for automatic login
kaiPassword=!

# Use automatic login
kaiAutoLogin=0

# Use Web User Interface instead of GUI program
kaiWebUI=1

# Automatically launch Kai user interface
kaiLaunchUI=1

# User interface program name
kaiUI=kaiUI.exe

# Web UI Password
kaiHTTPPassword=!

# Web UI Skin
kaiSkin=!

# Automatically open chat
kaiAutoOpenChat=0

# Enable PSP Mode (Automatic SSID detection)
kaiPSPMode=0

# Disable sleep mode
kaiDisableSleep=0

# MBCS code page for asian character sets
kaiCodepage=0

# Language
kaiLanguage=es

# Enable port address translation
kaiPAT=0

# Set UDP port for peer-to-peer connections (0=random)
kaiPort=30000

# Set UDP port for deep connections (0=disable)
# Do not enable this unless you are sure that you require deep resolution
kaiDeepPort=0

# Set TCP port for Web UI connections (connect with http://127.0.0.1:[portnumber]/)
# Default is 34522 - this does not need to be changed in most cases. You DO NOT need to forward this port in your router.
kaiWebUIPort=34522

# Use PSSDK or Winpcap
kaiLib=pssdk

# Autodetect Proxy Server
kaiProxyAutoDetect=1

# Proxy server IP address
kaiProxyServer=!

# Proxy server port
kaiProxyPort=0

# Network adapter (!=autodetect)
kaiAdapter=!

# Automatically shut down engine after x minutes (0=never)
kaiTimeout=0

# Automatically shut down engine when UI closes
kaiUIClose=1

# Accept connections from user interfaces on other computers
kaiAcceptRemote=0

Team XLink Moderator Joined: 27 Feb 2011 Posts: 1201

What is the path where the config is located ? Does Kai run now ?

Kai Beginner Joined: 26 Jun 2012 Posts: 13

giggyprince wrote:

What is the path where the config is located ? Does Kai run now ?

its in: "C:\Documents and Settings\Samsung\Datos de programa\XLink Kai"
but it still shows me the error "http://127.0.0.1:34522/config.html not found" when i try to start "configure kai".

Team XLink Moderator Joined: 27 Feb 2011 Posts: 1201

Have you enabled javascript in your webbrowser ? Have you deactivated browser plugins that might interfere like noscript ?

Kai Beginner Joined: 26 Jun 2012 Posts: 13

its now solved, seems that i needed to update windows compleatly... i can now start "configure kai", but a new problem appeared :\
after i finished configuring kai, then clicked save, it says that kai engine has detected a problem and must close, then when i try to run "configure kai" again, it shows the same problem instantly, also by running "start kai" but "start user interface" works fine... any help? and sorry fore giving more problems...

EDIT: also, the "configure kai" opens on web browser... its supposed to be like that?

Team XLink Moderator Joined: 27 Feb 2011 Posts: 1201

Switch from WebUI to Program/KaiUI and start kai and see if it works.

Kai Beginner Joined: 26 Jun 2012 Posts: 13

giggyprince wrote:

Switch from WebUI to Program/KaiUI and start kai and see if it works.

u mean by renaming the WRAR file named WebUI? it didnt work... or u meant another way?

Team XLink Moderator Joined: 27 Feb 2011 Posts: 1201

Open the kaiUserConfig.txt and change the value
# Use Web User Interface instead of GUI program
kaiWebUI=1 to 0
Thats how you switch from webUI to kaiUI. Or change it via configure kai in the start menu with the webbrowser that should open.