Differences

This shows you the differences between the selected revision and the current version of the page.

evo7:xp 2010/02/03 10:32 evo7:xp 2017/05/17 12:16 current
Line 1: Line 1:
 +**__Belkin F5D7050 Guide for Windows Xp.__**
 +This adapter is the most popular in Europe for Kai. You could find it easily in many shops.
 +
 +I have made it work with the 7,3 version of Kai.
 +
 +Here is the adapter.
 +
 +{{:73428699.jpg|}}
 +
 +The back side of it should look like this.
 +
 +{{:73428698.jpg|}}
 +
 +Check out the following link if you're unsure as to what version card you have:
 +
 +http://www1.belkin.com/uk/support/article/?lid=enu&aid=6121
 +
 +To make it work with Kai, you have to use these drivers.
 +
 +http://www.sendspace.com/file/vveb04
 +
 +------------------------------------------
 +If it appears you have the fourth version, you will have to use these drivers instead: http://cache-www.belkin.com/support/dl/f5d7050v4133_setup.exe Since they are packaged in a setup.exe, just run through each step of the installment's process and while your is fully set up, enable the Psp Xlink Mode like done below.
 +
 +------------------------------------
 +
 +Step One: Installing the drivers.
 +
 +Once you download the archive, unzip it somewhere in your hard disk.
 +
 +Plug your key right now. You will always have to plug it into the same plug as you did. Unless, Xp will not recognize it.
 +
 +You have to manually install it. Even though it is in French the circles to fill are the same.
 +
 +{{:sanstitretzh.png|}}
 +
 +{{:45505986.png|}}
 +
 +{{:95261955.png|}}
 +
 +{{:lol.png|}}
 +
 +{{:43935241.png|}}
 +
 +Browse to the directory of the driver: you will get to them.
 +
 +{{:59411621.png|}}
 +
 +Choose the Rt73.inf .
 +
 +{{:77414750.png|}}
 +
 +Click on "continue anyway" and you are done.
 +
 +Here is the part which makes the difference with non compatible adapters.
 +
 +Press Windows+R on your keyboard. Hint devmgmt.msc and press enter. You shall see your device manager list appearing.
 +
 +Right click on your Belkin and get to its properties.
 +
 +{{:33838293.png|}}
 +
 +Advanced, scroll down: you will see the psp xlink mode. Enable it.
 +
 +{{:81941837.png|}}
 +
 +Here we are for the first step.
 +
 +__Step two: Kai configuration.__
 +
 +Go to configure Kai.
 +
 +{{:71814445.png|}}
 +
 +Full it as follow except for personal data like Xtag or portfowarding.
 +
 +You are now ready to play with Kai.
 +Feel free to [[http://www.teamxlink.co.uk/forum/privmsg.php?mode=post&u=307332|PM]] me if you have any question.
www.chimeric.de Creative Commons License Valid CSS Driven by DokuWiki do yourself a favour and use a real browser - get firefox!! Recent changes RSS feed Valid XHTML 1.0