Differences

This shows you the differences between the selected revision and the current version of the page.

evo7:xp_and_vista 2010/02/05 11:27 evo7:xp_and_vista 2017/05/17 12:16 current
Line 1: Line 1:
 +__**White Wifi Max guide for Windows Xp.**__
 +{{:78313415.jpg|}}
 +
 +**Note: Even though the packing shows a black stick, there is a white one in it.**
 +
 +I assume you have the following setup:
 +
 +1.PC with Windows XP (32bit)
 +2.Already installed the latest Version of xlink kai (in my case 7.4.18), and have an account.
 +3.Have administrator rights on the PC.
 +4.Bought a Datel Wifi Max (white) with the model WL-685R(written on the back).
 +This model has the RT73 chip set.
 +
 +2.------------------------
 +Go to: Start → Control panel → network connections.
 +Right click on the Wireless Network Connection that has the RT73 USB Wireless LAN card description and choose „Properties“
 +It should look like this:
 +
 +{{:59971543.jpg|}}
 +
 +Here you choose „configure“ and then „advanced“.
 +In the list you will have to change the following value:
 +
 +{{:91672351.jpg|}}
 +
 +PSP Xlink mode → choose „Enable“ (This will enable the card to work with xlink)
 +Confirm with „OK“
 +Note: I also changed the Network type to ad-hoc, but i don't know if that is necessary.
 +
 +3.------------------------
 +Again: Right click on the Wireless Network Connection that has the RT73 USB Wireless LAN card description and choose „Properties“.
 +
 +{{:51101603.jpg|}}
 +
 +This time scroll down in the middle list and double click on "Internet protocol TCP/IP".
 +Choose to use a static IP Address and type in the values seen on this picture:
 +
 +{{:80720871.jpg|}}
 +
 +Click OK and you are done with configuring the card.
 +Just a quick info why i did this: If you set a static IP Address the connection between the PSP and the card will establish a lot quicker, as you will not have to wait for a address to be assigned.
 +
 +4.-----OPTIONAL-----------
 +Note: This section can be skipped - it is only important if you have games that change the ssid.
 +I did not know that as i originally wrote this guide.
 +
 +Go to Start → All programs → Xlink Kai → Configure Kai.
 +Please make sure you set the marked options as shown in this picture:
 +
 +{{:qkqrj-38b23ccd95df3b5661fd673810ec5c96.jpg|}}
 +
 +Click on save once you are done.
 +
 +5.------------------------
 +Right click on the Kai tray icon and choose close.
 +Boot up your PSP Game and go into the multiplayer lobby.
 +In my case i played Monster hunter freedom unite – so its the online gathering hall.
 +If the game you play has more than one lobby, choose always the first one as you will only see people online that are in the same lobby.
 +
 +Once you are inside the lobby and your psp wifi light is flashing, double click on the Ralink tray icon.
 +
 +Click on „Network“ and then choose scan – you will see a list looking like this:
 +
 +{{:qktls-38b23ccd95df3b5661fd673810ec5c96.jpg|}}
 +
 +Here choose the network with PSP_XXXX in the name and click connect.
 +Now you are connected with your PSP and are just moments away from playing on xlink kai.
 +
 +6.------------------------
 +Open xlink kai
 +
 +Note: If you choose the "follow psp ssid id" in the xlink configuration – it will disconnect your wireless connection with the psp – don't worry that is perfectly fine if that option is checked.
 +Just reconnect to the PSP_XXXX network in the Ralink software.
 +Kai will show a small pop up in the lower right corner that it changes the ssid to PSP_XXXX.
 +
 +What you will see now depends on the client you use, if you use the „Standard-GUI“ do the following, if you use the web interface – see below:
 +
 +Standard GUI
 +Login into kai and click on the globe – you can choose your games from there but don't do that yet – instead click on the magnifying glass.
 +This will open up the diagnostics mode:
 +
 +{{:qkvr0-38b23ccd95df3b5661fd673810ec5c96.jpg|}}
 +
 +The following options are important:
 +
 +Network reachable: Yes (can take some time!) – if that is not the case, you will have to forward the port.
 +See the forum for a how to.
 +
 +Once you verified the options click on the „Folder“
 +Here it should list a PSP - if it says „Sony PSP,configured successfully“ you are fine.
 +If not, check that you did everything as posted in the guide – if you did please search the forums.
 +
 +Web interface
 +Login into kai and click on „Metric“
 +This will open up the diagnostics:
 +
 +{{:qkeo0-38b23ccd95df3b5661fd673810ec5c96.jpg|}}
 +
 +The following options are important:
 +
 +Network reachable: Yes (can take some time!) – if that is not the case, you will have to forward the port.
 +See the forum for a how to.
 +
 +It should list your PSP here -If not, check that you did everything as posted in the guide – if you did please search the forums.
 +
 +
 +7.------------------------
 +You are ready to go – just choose the game you want to play and open up a lobby or use a existing one.
 +You will see players joining and can start playing.
www.chimeric.de Creative Commons License Valid CSS Driven by DokuWiki do yourself a favour and use a real browser - get firefox!! Recent changes RSS feed Valid XHTML 1.0