Translations of this page:

Belkin F5D7050 Guide for Windows Xp.

This adapter is the most popular in Europe for Kai. You could find it easily in many shops.

I have made it work with the 7,3 version of Kai.

Here is the adapter.

The back side of it should look like this.

Check out the following link if you're unsure as to what version card you have:

To make it work with Kai, you have to use these drivers.

If it appears you have the fourth version, you will have to use these drivers instead: Since they are packaged in a setup.exe, just run through each step of the installment's process and while your is fully set up, enable the Psp Xlink Mode like done below.

Step One: Installing the drivers.

Once you download the archive, unzip it somewhere in your hard disk.

Plug your key right now. You will always have to plug it into the same plug as you did. Unless, Xp will not recognize it.

You have to manually install it. Even though it is in French the circles to fill are the same.

Browse to the directory of the driver: you will get to them.

Choose the Rt73.inf .

Click on “continue anyway” and you are done.

Here is the part which makes the difference with non compatible adapters.

Press Windows+R on your keyboard. Hint devmgmt.msc and press enter. You shall see your device manager list appearing.

Right click on your Belkin and get to its properties.

Advanced, scroll down: you will see the psp xlink mode. Enable it.

Here we are for the first step.

Step two: Kai configuration.

Go to configure Kai.

Full it as follow except for personal data like Xtag or portfowarding.

You are now ready to play with Kai. Feel free to PM me if you have any question.

evo7/xp.txt · Last modified: 2017/05/17 12:16 (external edit) Creative Commons License Valid CSS Driven by DokuWiki do yourself a favour and use a real browser - get firefox!! Recent changes RSS feed Valid XHTML 1.0