Author |
Message |
TridenT_Boy3555
Kai Beginner
Joined: 17 Apr 2006
Posts: 2
|
Posted:
Mon Apr 17, 2006 2:25 am |
|
Is it even possible for me to get kai to work on my xbox with a hub hooked up on my network?(I have a laptop on there too) |
|
|
|
|
XxJustBlazexX
Kai Lover
Joined: 17 Mar 2005
Posts: 699
|
Posted:
Mon Apr 17, 2006 4:31 am |
|
Sure, as long as the engine that you are running is in the same LAN, then yes. Your settings on XBMC will direct to where the Kai engine should be found at, specifically your PC. |
_________________ this space for rent. |
|
|
|
[MF]superman
Kai Spammer
Joined: 21 Jul 2004
Posts: 1168
|
Posted:
Mon Apr 17, 2006 1:05 pm |
|
Just to reinforce what justblaze said but in smaller terms.
YOU CAN RUN THE UI BUT NOT THE ENGINE ON XBMC. |
_________________ makes me go |
|
|
|
XxNoFear63xX
Kai Beginner
Joined: 14 Apr 2006
Posts: 7
|
Posted:
Mon Apr 17, 2006 9:09 pm |
|
ok well since no one helped me on my problem i guess i will post it here.....i have xlink up and running on my computer but says cannot connect to service and stuff and ive tried everything and i acidently made it that when i do play on kai and then i shut off my xbox it shuts my computer down to
i have 2 dashboards i guess...avalaunch and XBMC but avalaunch being the main startup one...i tried making XBMC my main one but its to confusing and i am also running on a wireless gaming adapter |
|
|
|
|
TridenT_Boy3555
Kai Beginner
Joined: 17 Apr 2006
Posts: 2
|
Posted:
Mon Apr 17, 2006 10:53 pm |
|
What would I put for the IP Address though for the engine? Because its DHCP on a HUB...The hub just gives out the same address I think(Um..My xbox doesnt get a IP address while in DHCP but I do) |
|
|
|
|
Weily
Kai Beginner
Joined: 21 May 2004
Posts: 7
|
Posted:
Thu Apr 27, 2006 6:24 pm |
|
XxNoFear63xX wrote: |
...i have xlink up and running on my computer but says cannot connect to service... |
Kai or XBMC says it can not connect?
Kai: In the 'select a profile' dropdown box select 'Engine Only (for dashboards)'. In the 'Network adapter' dropdown select one of the 'autodetect' options. In the 'Close engine after' dropdown select 'never'. Make sure your default xtag and password in the config are the same as what you have set in XBMC and or Avalaunch (and have registered for on teamxlink.co.uk). Finally select 'any IP addy' in the Accept UI connections from' dropdown and hit ok. Then start Kai.
XBMC:
Settings-->Programs-->Kai: Set your Kai tag / Kai PW and the IP addy of the PC running Kai there.
Back up and reboot your Xbox.
All of this is explained in even more detail in the official XBMC + Kai Guide here http://www.teamxlink.co.uk/?go=download
XxNoFear63xX wrote: |
i tried making XBMC my main one but its to confusing |
I saw an earlier post of yours. First ensure the XBMC folder is in E:/APPS, then, on C:, rename your avalaunch.xbe to goodavalaunch.xbe then rename the RENAMEME.xbe to avalaunch.xbe (we know this boots). The renameme.xbe, simply put, points to and looks for and launches E:/APPS/XBMC/default.xbe
XxNoFear63xX wrote: |
i am also running on a wireless gaming adapter |
Were you able to connect while wired? I would try that first before going wire free. Rule out one peice of the puzzle at a time. |
_________________
Xbox: 1.6
Xecuter 2.6CE Chip
Dash: XBMC / UnleashX
HDD: WD250
DVD: Samsung |
|
|
|
Weily
Kai Beginner
Joined: 21 May 2004
Posts: 7
|
Posted:
Thu Apr 27, 2006 6:31 pm |
|
TridenT_Boy3555 wrote: |
What would I put for the IP Address though for the engine? |
Do IPconfig on the PC running the engine. The IP addy you'll need can be found there. |
_________________
Xbox: 1.6
Xecuter 2.6CE Chip
Dash: XBMC / UnleashX
HDD: WD250
DVD: Samsung |
|
|
|
|
|
View next topic
View previous topic
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
|
Powered by phpBB
© 2001, 2002 phpBB Group :: Theme by Daz ::
All times are GMT
| |