| Author |
Message |
Xagran
Kai Beginner
Joined: 20 Oct 2004
Posts: 2
Location: Canada
|
 Posted:
Wed Oct 20, 2004 10:38 pm |
  |
Is your network reachable?
N/A
Are you using a port-forward?
yes
Is your console being detected?
N/A
Brief description of your network setup:
ps2/laptop/desktop connected to linksys WRT54G (using cables not wireless)
Do you use a software firewall? What brand? Have you made any changes to it?
no and xp firewall is off
Operating System?
win xp sp1
Problem description?
Kai doesnt even let me connect it just stays on "requerying orbital mesh.."
[KaiUserConfig]
kaiPort=3000
kaiDeepPort=0
kaiAccept=ALL
kaiTimeout=NEVER
kaiNIC=0
kaiLaunch=BOTH
kaiHomebrew=OFF
kaiWireless=
kaiUI=Default
 |
Last edited by Xagran on Wed Oct 20, 2004 11:39 pm; edited 1 time in total |
|
  |
|
Creator
Kai Beginner
Joined: 02 Oct 2004
Posts: 54
Location: USA - Colorado
|
| Posted:
Thu Oct 21, 2004 1:14 am |
|
Try changing the port to 30,000 instead of 3000... |
|
|
|
|
Xagran
Kai Beginner
Joined: 20 Oct 2004
Posts: 2
Location: Canada
|
| Posted:
Thu Oct 21, 2004 1:33 am |
|
|
|
|
dfunked
Team XLink Administrator
Joined: 25 Apr 2004
Posts: 7005
Location: Australia - VIC
|
| Posted:
Thu Oct 21, 2004 3:08 am |
|
Make the 'Start' and 'End' fields both have 30000 (altho I doubt that is your problem).
I've now had around 3 people with the same router have problems. I might need to investigate with it (my neighbour has one).. |
|
|
|
|
dfunked
Team XLink Administrator
Joined: 25 Apr 2004
Posts: 7005
Location: Australia - VIC
|
| Posted:
Thu Oct 21, 2004 5:28 am |
|
Just grabbed my neighbours WRT54G. Works perfectly when forwarding port 30000 (in both Start and End) columns, and putting 30000 into 'Kai Port' in the Kai Configuration Tool. |
|
|
|
|
xTopher
Kai Beginner
Joined: 20 Oct 2004
Posts: 3
Location: USA - Texas
|
| Posted:
Thu Oct 21, 2004 5:49 am |
|
still doesn't work for me, thanks for your help though. |
|
|
 |
|
[FUNK]
Team XLink Administrator
Joined: 21 May 2004
Posts: 3354
|
| Posted:
Thu Oct 21, 2004 12:45 pm |
|
Okay I am lost on this one. The person that opened the trouble request is not the same person that is updating this section. Where are we at on this? |
_________________
Funk! |
|
|
|
dfunked
Team XLink Administrator
Joined: 25 Apr 2004
Posts: 7005
Location: Australia - VIC
|
| Posted:
Thu Oct 21, 2004 12:59 pm |
|
Go him up and going. Few problems on his part 
1. He was using the old build of Kai 
2. He was pointing to 192.168.1.100 when the PC was .101
He's sorted. Another problem down Come on Funk, you're trailing |
|
|
|
|
[FUNK]
Team XLink Administrator
Joined: 21 May 2004
Posts: 3354
|
| Posted:
Thu Oct 21, 2004 1:11 pm |
|
hehe, well which one did you fix m8? Cause there are 3 different posters in here with some sort of problem.  |
_________________
Funk! |
|
|
|
dfunked
Team XLink Administrator
Joined: 25 Apr 2004
Posts: 7005
Location: Australia - VIC
|
| Posted:
Thu Oct 21, 2004 1:18 pm |
|
Xagran = Original poster = fixed.
XTopher has posted in General Help. I've told him to read this thread again and make sure he's not in the same boat as Xagran. |
|
|
|
|
[FUNK]
Team XLink Administrator
Joined: 21 May 2004
Posts: 3354
|
| Posted:
Thu Oct 21, 2004 1:27 pm |
|
Okay I get it. It was still early for me when I first read it. I am better now daddy  |
_________________
Funk! |
|
|
|
|
|
