Author |
Message |
River-Trent
Kai Beginner
Joined: 22 Feb 2005
Posts: 20
Location: United Kingdom
|
Posted:
Tue Sep 16, 2008 3:38 pm |
|
Do you install the newer kiaengine the same way as the older kaid???? |
|
|
|
|
(-TU-)-Mortj109-
Kai Spammer
Joined: 16 Jun 2005
Posts: 8681
|
Posted:
Tue Sep 16, 2008 3:39 pm |
|
|
|
|
CrunchBite
Team XLink Developer
Joined: 28 Nov 2007
Posts: 2338
|
Posted:
Tue Sep 16, 2008 7:38 pm |
|
If you mean putting kaid in /bin and kaid.conf in /etc, it is similar yes, you could (if you wanted) put kaiEngine in /bin |
|
|
|
|
River-Trent
Kai Beginner
Joined: 22 Feb 2005
Posts: 20
Location: United Kingdom
|
Posted:
Wed Sep 17, 2008 6:09 pm |
|
|
|
|
Martinex2017
Kai Beginner
Joined: 24 Mar 2007
Posts: 7
|
Posted:
Wed Feb 11, 2009 5:46 pm |
|
I have with Xlink Kai on Linux Ubuntu 8.10 32Bit.
ICS works, FTP Xbox-PC works.
Internet works.
Xlink kai doesn't work.
After run command I can see this window
martinex@martinex-desktop:~$ ifconfig
eth0 Link encap:Ethernet HWaddr 00:0e:2e:86:fc:ed
inet addr:192.168.0.1 Bcast:192.168.0.255 Mask:255.255.255.0
UP BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
Interrupt:10 Base address:0xd000
eth1 Link encap:Ethernet HWaddr 00:0d:87:9a:06:1f
UP BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
Interrupt:11 Base address:0x8000
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:274 errors:0 dropped:0 overruns:0 frame:0
TX packets:274 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:19302 (19.3 KB) TX bytes:19302 (19.3 KB)
nas0 Link encap:Ethernet HWaddr 00:60:4c:f4:47:14
inet addr:192.168.2.1 Bcast:192.168.2.255 Mask:255.255.255.0
inet6 addr: fe80::260:4cff:fef4:4714/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:301918 errors:0 dropped:0 overruns:0 frame:0
TX packets:192055 errors:44 dropped:0 overruns:44 carrier:0
collisions:0 txqueuelen:1000
RX bytes:376082686 (376.0 MB) TX bytes:20155809 (20.1 MB)
ppp0 Link encap:Point-to-Point Protocol
inet addr:83.6.228.65 P-t-P:213.25.2.12 Mask:255.255.255.255
UP POINTOPOINT RUNNING NOARP MULTICAST MTU:1492 Metric:1
RX packets:301102 errors:0 dropped:0 overruns:0 frame:0
TX packets:191144 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:3
RX bytes:373636060 (373.6 MB) TX bytes:14019920 (14.0 MB)
martinex@martinex-desktop:~$
How Can I fix it? |
|
|
|
|
MeanMF
Team XLink Administrator
Joined: 11 Nov 2004
Posts: 5024
|
Posted:
Wed Feb 11, 2009 5:59 pm |
|
|
|
|
Martinex2017
Kai Beginner
Joined: 24 Mar 2007
Posts: 7
|
Posted:
Sat Feb 14, 2009 2:13 pm |
|
It does work.
There is another problem, with engine.
I can play, I can host, but engine after some time will close. I don't know Why.
Linux Ubuntu 8.10
Gnome.
Plz help. |
|
|
|
|
|
|
View next topic
View previous topic
You can post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
|
Powered by phpBB
© 2001, 2002 phpBB Group :: Theme by Daz ::
All times are GMT
| |