| Author |
Message |
Maverynthia
Kai Beginner
Joined: 03 Feb 2008
Posts: 28
|
 Posted:
Sun Feb 03, 2008 10:54 pm |
  |
Is your network reachable? Yes
Are you using a router? no
Did you set a static IP on the PC running Kai? no (no router)
Did you forward port 30000 to the static IP? no (no router)
Did you click the globe after forwarding to see if your network goes reachable? yes
What console are you using? PSP
Is your console being detected? no
Brief description of your network setup:
(Cable Modem)--(Computer)=[WUSB54GC)...(PSP)
Model numbers of the router, and modem? no router Toshiba Modem DAZ8823A
Do you use a software firewall? What brand? Have you made any changes to it? no
Operating System? Win Xp SP 2
Problem description?
PSP is not showing up
[KaiUserConfig]
kaiUsername=*****
kaiPassword=*****
kaiPort=30000
kaiDeepPort=0
kaiAccept=LOCAL
kaiTimeout=NOUI
kaiNIC=3
kaiLaunch=BOTH
kaiHomebrew=OFF
kaiPSPMode=OFF
kaiPAT=OFF
kaiAutoLogin=ON
kaiAllowBadNICS=ON
kaiWireless=022F1F23460F;001EE51EBD11;
kaiUI=Default
I've read this thread:
http://www.teamxlink.co.uk/forum/viewtopic.php?t=5649
Followed it and nothing happened.. 
I then found this thread:
http://www.teamxlink.co.uk/forum/viewtopic.php?t=22217&highlight=wusb54gc
Also followed it and still nothing. I even tried both on the Linksys Monitor and on the Win XP Wireless configuration. I paid close attention to the Wireless setting too where it says to plant the Monitor Mac ID and the actual Linksys Mac ID (on the cover)
Maybe someone needs to take me step by step to installing this thing and setting it up :/ :\ |
|
|
  |
|
(-TU-)-Mortj109-
Kai Spammer
Joined: 16 Jun 2005
Posts: 8681
|
| Posted:
Mon Feb 04, 2008 1:50 am |
|
the wrt54gc does not have Promiscus mode It will not work with kai. |
|
|
|
|
Maverynthia
Kai Beginner
Joined: 03 Feb 2008
Posts: 28
|
| Posted:
Mon Feb 04, 2008 2:16 am |
|
Great, so that guide that was posted here was a fallacy and I wasted $40 bucks on it? -_-
BTW it's a WUSB54GC NOT a wrt54gc |
|
|
|
|
Maverynthia
Kai Beginner
Joined: 03 Feb 2008
Posts: 28
|
| Posted:
Mon Feb 04, 2008 2:50 pm |
|
OK I managed to get this thing to work.. I had to 'hack' some other Ralink drivers which BTW have built in PSPxlink:
Here they are:
http://www.maverynthia.com/WUSB54GC-XlinkDrivers.rar
Just DL them and then go into the windows configuration > Update Driver > Choose > Have disk
It should overwrite the current installed driver if not...do a search for rt73.* and delete everything that comes up (save the one you just unrared)
Next go to Network Connections > Configure... > Advanced > PSP Xlink Mode (Enable)
Then do the Network search for your PSP and wait for 'Connected' and you should be good to go. |
|
|
|
|
Maverynthia
Kai Beginner
Joined: 03 Feb 2008
Posts: 28
|
| Posted:
Mon Aug 11, 2008 10:28 am |
|
Another "hack" to get the linksys running:
Completely disregard the linksys drivers at all...take the CD and bury it somewhere, or have happy microwave fun. (Not responsible for lost and unusable CDs)
Grab the Ralink drivers here
Found on page: http://www.ralinktech.com/support.php?s=1
USB(RT257x/RT2671)
Install those, restart or whatever. There should be a black icon in the sysbar. Exit it.
Download this and copy it OVER the files in the ~\Ralink folder..where ever it is.
http://www.maverynthia.com/RALINK-Linksys-rt73-utilmodify.rar
Now feel free to start the Ralink thingy again.
Plop in the USB dongle when it asks for drivers, say that you will choose the driver and to pick from a list (if you previously installed) and choose the one that says 'Ralink'. If it's clean then surf into the Ralink directory and look for the drivers folder and use that one.
The version number should be: 1.02.03.0000 if it's different you'll have to change the file by installing the .inf and doing the manual search for drivers.
Also, if you go to Properties on the connection, there should be an XLink Kai option defaulted to (Disabled).
What the 'utilmodify' does. It basically give you the functionality back to the dongle where you can access wifi networks or set up your own Soft AP. The only thing changed was to add the Device ID to the .ini files.
EDIT: Updated links |
_________________
Last edited by Maverynthia on Mon Jan 25, 2010 9:45 pm; edited 1 time in total |
|
|
|
-Enix-
Kai Beginner
Joined: 13 Aug 2008
Posts: 1
|
| Posted:
Wed Aug 13, 2008 2:17 pm |
|
|
|
|
Maverynthia
Kai Beginner
Joined: 03 Feb 2008
Posts: 28
|
| Posted:
Mon Jan 25, 2010 9:46 pm |
|
I updated the links to the dirvers and such. Ralink updated their page. |
_________________
|
|
|
|
Narolf
Kai Spammer
Joined: 28 Jan 2009
Posts: 1794
|
| Posted:
Mon Jan 25, 2010 10:58 pm |
|
| Maverynthia wrote: |
| I updated the links to the dirvers and such. Ralink updated their page. |
Oh, thanks for such a come back and update.
Your tip never got stickied somewhere actually: gonna do it now.  |
|
|
 |
|
FreakOtaku
Kai Beginner
Joined: 24 Feb 2010
Posts: 1
|
| Posted:
Wed Feb 24, 2010 4:03 am |
|
|
|
|
Justin900
Kai Beginner
Joined: 22 Mar 2010
Posts: 1
|
| Posted:
Mon Mar 22, 2010 10:01 am |
|
I have tried both of those 'hacks' and i get and error saying something with x64 system problem, help? |
|
|
|
|
Blueset
Kai Beginner
Joined: 15 Apr 2010
Posts: 1
|
| Posted:
Thu Apr 15, 2010 11:11 pm |
|
When you installed Ralink and the device, what did you install and how did you find the Driver in the device list.
Another thing, did you use XP OS |
|
|
|
|
Agilaz
Kai Beginner
Joined: 15 Mar 2011
Posts: 1
|
| Posted:
Tue Mar 15, 2011 10:11 pm |
|
Fix for WUSB54GC doesn't work on 64-bit systems. |
|
|
|
|
Maverynthia
Kai Beginner
Joined: 03 Feb 2008
Posts: 28
|
| Posted:
Tue Feb 09, 2016 12:54 pm |
|
Yup it doesn't work on 64 bit systems. Just tried it myself :< |
_________________
|
|
|
|
|
|
