Author |
Message |
wolfhunter727
Kai Beginner
Joined: 15 Aug 2010
Posts: 13
|
Posted:
Sun Aug 15, 2010 12:10 am |
|
So I followed all the steps in the sticky but when I reach the time when you have to open the bridge.exe file, There are 3 options:
0:Multithread<default>
1:SingleThread<if multithread is unstable>
2:Singlethread<not used>
Enter<0-2>
When I enter any one of the three options, it says:
No interfaces found! Make sure WinPcap<libpcap> is installed.
The problem: I installed WinPcap with no problems.
What am I supposed to do?
HELP!?!?! |
|
|
|
|
Critt
Kai Spammer
Joined: 09 Jul 2010
Posts: 1436
|
Posted:
Sun Aug 15, 2010 12:11 am |
|
Install CCleaner from download.com
run registry fixer.
re-install WinPcap. |
_________________ -=-◙◙-=- |
|
|
|
Critt
Kai Spammer
Joined: 09 Jul 2010
Posts: 1436
|
Posted:
Sun Aug 15, 2010 12:12 am |
|
By the way, what Windows are you using? |
_________________ -=-◙◙-=- |
|
|
|
Critt
Kai Spammer
Joined: 09 Jul 2010
Posts: 1436
|
Posted:
Sun Aug 15, 2010 12:14 am |
|
In XLink Kai configuration screen, choose WinPcap not PSSDK. |
_________________ -=-◙◙-=- |
|
|
|
Critt
Kai Spammer
Joined: 09 Jul 2010
Posts: 1436
|
Posted:
Sun Aug 15, 2010 12:15 am |
|
For right configuration for XLink Kai, disable PAT, disable Follow PSP SSID, disable Remote UI thingy, Kai port 3000, deep port 0, choose Loopback as your main adapter for XLink Kai. |
_________________ -=-◙◙-=- |
|
|
|
Critt
Kai Spammer
Joined: 09 Jul 2010
Posts: 1436
|
Posted:
Sun Aug 15, 2010 12:40 am |
|
Try bridge v2 from Hawk's guide. |
_________________ -=-◙◙-=- |
|
|
|
Critt
Kai Spammer
Joined: 09 Jul 2010
Posts: 1436
|
Posted:
Sun Aug 15, 2010 12:43 am |
|
I will post a picture how bridge should look like. |
_________________ -=-◙◙-=- |
|
|
|
Critt
Kai Spammer
Joined: 09 Jul 2010
Posts: 1436
|
Posted:
Sun Aug 15, 2010 12:48 am |
|
Here is the picture. |
_________________ -=-◙◙-=- |
|
|
|
Critt
Kai Spammer
Joined: 09 Jul 2010
Posts: 1436
|
Posted:
Sun Aug 15, 2010 7:56 am |
|
Can you please share the results? |
_________________ -=-◙◙-=- |
|
|
|
wolfhunter727
Kai Beginner
Joined: 15 Aug 2010
Posts: 13
|
Posted:
Sun Aug 15, 2010 10:24 am |
|
It doesn't show that way.
When I type the number in which the MS Loopback driver is, here is what it says:
Enter the interface number(The number)
Thread:0
Searching PSPUSB device
PcapLoopThread start
What am I missing? (Sorry for the long reply it was a busy day for me) |
|
|
|
|
Critt
Kai Spammer
Joined: 09 Jul 2010
Posts: 1436
|
Posted:
Sun Aug 15, 2010 10:47 am |
|
wolfhunter727 wrote: |
It doesn't show that way.
When I type the number in which the MS Loopback driver is, here is what it says:
Enter the interface number(The number)
Thread:0
Searching PSPUSB device
PcapLoopThread start
What am I missing? (Sorry for the long reply it was a busy day for me) |
No problem, reply whenever you want ^^.
But did you try running the registry fixer and re-installing WinPcap? |
_________________ -=-◙◙-=- |
|
|
|
wolfhunter727
Kai Beginner
Joined: 15 Aug 2010
Posts: 13
|
Posted:
Sun Aug 15, 2010 12:23 pm |
|
I did, but it still remains the same.
What am I supposed to "Clean" with the Ccleaner? |
|
|
|
|
Critt
Kai Spammer
Joined: 09 Jul 2010
Posts: 1436
|
Posted:
Sun Aug 15, 2010 1:08 pm |
|
wolfhunter727 wrote: |
I did, but it still remains the same.
What am I supposed to "Clean" with the Ccleaner? |
No, CCleaner cleans & fix registry errors. On the left side, you should something that says Registry I think, click it, then click Scan for issues. After its done scanning, click fix issues, then it will ask for backup, click no then click fix all issues. |
_________________ -=-◙◙-=- |
|
|
|
drnub
Kai Beginner
Joined: 03 May 2010
Posts: 10
|
Posted:
Sat Aug 21, 2010 2:52 am |
|
Ahh i have the same problem... i did everything that people here suggested and still no show. I have win7 32bit :l
EDIT: nvm i got it fixed, i used the previous v1 brdige and it works v2 didnt work for some reason :O |
Last edited by drnub on Sat Aug 21, 2010 3:01 am; edited 1 time in total |
|
|
|
ewan08
Kai Beginner
Joined: 26 Oct 2009
Posts: 27
|
Posted:
Sat Aug 21, 2010 2:59 am |
|
you have to install the latest WinPcap and the latest AdhocToUSBv2 |
|
|
|
|
wolfhunter727
Kai Beginner
Joined: 15 Aug 2010
Posts: 13
|
Posted:
Sat Aug 21, 2010 4:00 pm |
|
sorry for the very long reply, I only got to mess with my PSP this day
It still doesn't work. I tried the CCleaner, the results are still the same. Help pls, I want to play MHFU with someone so badly. |
|
|
|
|
wolfhunter727
Kai Beginner
Joined: 15 Aug 2010
Posts: 13
|
Posted:
Sat Aug 21, 2010 4:50 pm |
|
Never mind, I managed to make it work now. It seems that you have to RUN the game first for the bridge to work. |
|
|
|
|
Michael_T
Kai Lover
Joined: 21 May 2004
Posts: 957
|
Posted:
Sat Aug 21, 2010 5:41 pm |
|
@ CriTT : Jesus, look at this topic . Use the edit button !
This is your last warning. |
|
|
|
|
Critt
Kai Spammer
Joined: 09 Jul 2010
Posts: 1436
|
Posted:
Sat Aug 21, 2010 6:44 pm |
|
[quote="Michael."]@ CriTT : Jesus, look at this topic . Use the edit button !
This is your last warning.[/quote
In this time, I didn't use edit button, sorry... Forgive me. If you find any old topics with these, then it was the time I didn't use the edit button. Forgive me. llnk explained for me. |
_________________ -=-◙◙-=- |
|
|
|
Michael_T
Kai Lover
Joined: 21 May 2004
Posts: 957
|
Posted:
Sat Aug 21, 2010 7:05 pm |
|
|
|
|
|