FAQ  •  Search  •  Profile  •  Log in to check your private messages  •  Log in
 Run new KIAENGINE in a shell possible? View next topic
View previous topic
Post new topicReply to topic
Author Message
GoldenGun
Kai Beginner
Kai Beginner


Joined: 17 Dec 2007
Posts: 41

PostPosted: Wed Jan 28, 2009 4:00 pm Reply with quoteBack to top

I have a linux router that I can only SSH into and have no clue what to do with the latest engine. there is no config file and the only install help i can fine is for a GUI only. any help?
View user's profileSend private message
CrunchBite
Team XLink Developer
Team XLink Developer


Joined: 28 Nov 2007
Posts: 2328

PostPosted: Thu Jan 29, 2009 6:43 pm Reply with quoteBack to top

Support for running kai on all routers has been discontinued. You'll need to use a PC to run kai.

Second, the new engine requires a GUI to run, as well as the libwxgtk-2.8 libraries.
View user's profileSend private message
RivaTNT
Kai Beginner
Kai Beginner


Joined: 07 Dec 2010
Posts: 2

PostPosted: Sat May 07, 2011 1:23 pm Reply with quoteBack to top

Hi, first of all: I know this is a deprecated thread but the problem mentioned is similar to mine and I don't want to start a new thread for this as the subject would be rather the same.

Well, here is my problem:
I'm running an Ubuntu server which would be perfect for a Xlink server. The only thing is, that I want to access the UI from another machine (Freestyle Dash or a Notebook just in case) which works if I'm running "kaiengine" attached to Xorg. I can access the WebUI from a notebook or connect via Freestyle.

BUT unfortunately that is not the wanted behaviour Sad
The question is wether it is possible to run kaiengine with a -nogui option or such to fire it up it without a GUI autostart. I think that should be pretty easy to iterate (hopefully). Maybe a simple check wether kaiengine is ran via the -nogui option followed by omitting/bypassing the GUI initialisation part would do the job.
I'm NOT asking for a complete rewrite Wink The initial configuration would be done via Xorg/GTK but afterwards kaiengine could be conviniently run as a service via CLI only with the aforementioned -nogui option.

Thanks to the Xlink team for the AWESOME work on this piece of software!

Cheers,
RivaTNT
View user's profileSend private message
KeyofBlueS
Kai Beginner
Kai Beginner


Joined: 09 May 2011
Posts: 1

PostPosted: Mon May 09, 2011 8:29 am Reply with quoteBack to top

Hi!

I agree with RivaTNT, I also need to run kaiengine on a server without gui,

It would also be useful an option to fork the program to background, something like:

# kaiengine --nogui --background

The result would be starting kaiengine without gui and demonized.

please make it possible.

Thanks!
View user's profileSend private message
varazir
Kai Beginner
Kai Beginner


Joined: 04 Oct 2011
Posts: 1

PostPosted: Tue Oct 04, 2011 7:00 pm Reply with quoteBack to top

So you can't run it in a virtual server ?
View user's profileSend private message
Display posts from previous:      
Post new topicReply to topic


 Jump to:   



View next topic
View previous topic
You can post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


Powered by phpBB © 2001, 2002 phpBB Group :: Theme by Daz :: All times are GMT