Author |
Message |
NDballers
Kai Beginner
Joined: 11 Jul 2012
Posts: 8
|
Posted:
Sat Jul 14, 2012 5:24 am |
|
Is your network reachable? Yes
Are you using a router? Yes
Did you set a static IP on the PC running Kai? Yes
Did you forward port 30000 to the static IP? Yes
Did you click the globe after forwarding to see if your network goes reachable? It is reachable before I click the globe
What console are you using? Xbox360-Jtag
Is your console being detected? Yes
Brief description of your network setup: Jtag is ethernet into router, PC wireless to the same router
Model numbers of the router, and modem? Netgear WRG614v10 and a 2WIRE 3801HGV
Do you use a software firewall? What brand? Have you made any changes to it? I have no firewall
Operating System? Windows 7
Problem description? My network is reachable, I have port forwarded both my router and modem to my laptop (with a static ip) My jtag is plugged into the router with a ethernet connection. I have the ping patch, with the new version of Freestyle dash, and DashLaunch. I have even got the same TU's on games, and I everytime I refresh, no games pop up.
I do have teamviewer if anyone wants to help me that way.
Thanks for viewing!
Extra both my jtag and retail can connect to each other. (there on the same network)
Config ==
# XLink Kai Engine Configuration
# Version 7.4.24
[KaiUserConfig]
# Username for automatic login
kaiUsername=
# Password for automatic login
kaiPassword=
# Use automatic login
kaiAutoLogin=1
# Use Web User Interface instead of GUI program
kaiWebUI=0
# Automatically launch Kai user interface
kaiLaunchUI=0
# User interface program name
kaiUI=kaiUI.exe
# Web UI Password
kaiHTTPPassword=!
# Web UI Skin
kaiSkin=!
# Automatically open chat
kaiAutoOpenChat=1
# Enable PSP Mode (Automatic SSID detection)
kaiPSPMode=0
# Disable sleep mode
kaiDisableSleep=1
# MBCS code page for asian character sets
kaiCodepage=0
# Language
kaiLanguage=en
# Enable port address translation
kaiPAT=0
# Set UDP port for peer-to-peer connections (0=random)
kaiPort=30000
# Set UDP port for deep connections (0=disable)
# Do not enable this unless you are sure that you require deep resolution
kaiDeepPort=0
# Set TCP port for Web UI connections (connect with http://127.0.0.1:[portnumber]/)
# Default is 34522 - this does not need to be changed in most cases. You DO NOT need to forward this port in your router.
kaiWebUIPort=34522
# Use PSSDK or Winpcap
kaiLib=pssdk
# Autodetect Proxy Server
kaiProxyAutoDetect=1
# Proxy server IP address
kaiProxyServer=!
# Proxy server port
kaiProxyPort=0
# Network adapter (!=autodetect)
kaiAdapter=\Device\{28CABC13-04BA-4793-9EAE-713FDB95C0EB}
# Automatically shut down engine after x minutes (0=never)
kaiTimeout=0
# Automatically shut down engine when UI closes
kaiUIClose=0
# Accept connections from user interfaces on other computers
kaiAcceptRemote=1 |
|
|
|
|
Lionheart
Team XLink Administrator
Joined: 05 May 2008
Posts: 1499
|
Posted:
Sat Jul 14, 2012 2:21 pm |
|
NDballers wrote: |
# Enable port address translation
kaiPAT=0 |
Enable it and try again
if not
NDballers wrote: |
# Set UDP port for peer-to-peer connections (0=random)
kaiPort=30000 |
change it to 0 |
_________________ http://es.teamxlink.co.uk/forum Ayuda en Espa�ol
Lionheart@teamxlink.co.uk |
|
|
|
giggyprince
Team XLink Moderator
Joined: 27 Feb 2011
Posts: 1206
|
Posted:
Sat Jul 14, 2012 2:49 pm |
|
Have you under default profiles set it to "Seperate Use - Engine PC" (only editable in the webbrowser) and dont use "autodetect" for the adapter it has to be your PCs Network card you are using to access the internet. |
|
|
|
|
NDballers
Kai Beginner
Joined: 11 Jul 2012
Posts: 8
|
Posted:
Sat Jul 14, 2012 7:50 pm |
|
Lionheart wrote: |
NDballers wrote: |
# Enable port address translation
kaiPAT=0 |
Enable it and try again |
So you mean make the number = 1 and save it? (in the config)
Quote: |
if not
NDballers wrote: |
# Set UDP port for peer-to-peer connections (0=random)
kaiPort=30000 |
change it to 0 |
Same for this, change it to 0 in the config and save it? |
|
|
|
|
Lionheart
Team XLink Administrator
Joined: 05 May 2008
Posts: 1499
|
Posted:
Sat Jul 14, 2012 8:44 pm |
|
|
|
|
NDballers
Kai Beginner
Joined: 11 Jul 2012
Posts: 8
|
Posted:
Sun Jul 15, 2012 4:00 am |
|
Lionheart wrote: |
yeah you need save the changes and re- kai |
Everything went fine, my network was reachable, my console was found... and I tried to connect and no game was found -,-
I was in the correct lobby (on xlink)
I had the TU (title update) that everyone had also.
No game was even found.
Are you sure it will work with my setup?
My jtag is ethernet into the router, my xlink is on my laptop and my laptop is wirelessly connected to the router. |
|
|
|
|
giggyprince
Team XLink Moderator
Joined: 27 Feb 2011
Posts: 1206
|
Posted:
Sun Jul 15, 2012 1:31 pm |
|
You havent answered my question
Quote: |
Have you under default profiles set it to "Seperate Use - Engine PC" (only editable in the webbrowser) and dont use "autodetect" for the adapter it has to be your PCs Network card you are using to access the internet. |
|
|
|
|
|
NDballers
Kai Beginner
Joined: 11 Jul 2012
Posts: 8
|
Posted:
Sun Jul 15, 2012 9:22 pm |
|
giggyprince wrote: |
You havent answered my question
Quote: |
Have you under default profiles set it to "Seperate Use - Engine PC" (only editable in the webbrowser) and dont use "autodetect" for the adapter it has to be your PCs Network card you are using to access the internet. |
|
Yeah everything is correct, but when I save the change of Separate Use Engine PC and load the configuration again this happens.
http://gyazo.com/c2244c894a4900d0b2316a3ef9ce67b9
The default profile is back to nothing?[/url] |
|
|
|
|
giggyprince
Team XLink Moderator
Joined: 27 Feb 2011
Posts: 1206
|
Posted:
Sun Jul 15, 2012 9:52 pm |
|
Quote: |
The default profile is back to nothing? |
Thats normal as long as you set it once it should be good. Is it now working for you ? |
|
|
|
|
NDballers
Kai Beginner
Joined: 11 Jul 2012
Posts: 8
|
Posted:
Sun Jul 15, 2012 9:58 pm |
|
giggyprince wrote: |
Quote: |
The default profile is back to nothing? |
Thats normal as long as you set it once it should be good. Is it now working for you ? |
No it still doesn't work |
|
|
|
|
giggyprince
Team XLink Moderator
Joined: 27 Feb 2011
Posts: 1206
|
Posted:
Sun Jul 15, 2012 10:59 pm |
|
|
|
|
NDballers
Kai Beginner
Joined: 11 Jul 2012
Posts: 8
|
Posted:
Sun Jul 15, 2012 11:11 pm |
|
|
|
|
giggyprince
Team XLink Moderator
Joined: 27 Feb 2011
Posts: 1206
|
Posted:
Sun Jul 15, 2012 11:18 pm |
|
Disable stealth mode and block ping. |
|
|
|
|
NDballers
Kai Beginner
Joined: 11 Jul 2012
Posts: 8
|
Posted:
Sun Jul 15, 2012 11:21 pm |
|
giggyprince wrote: |
Disable stealth mode and block ping. |
Yeah those were the ones I thought you were going to say
Ill test it in a few minutes. |
|
|
|
|
iamxkkt
Kai Beginner
Joined: 27 Jul 2012
Posts: 9
|
Posted:
Fri Jul 27, 2012 5:05 pm |
|
I have exactly the same issue, but my firewall is letting the connections through. |
|
|
|
|
giggyprince
Team XLink Moderator
Joined: 27 Feb 2011
Posts: 1206
|
Posted:
Fri Jul 27, 2012 6:05 pm |
|
Have you tried running FSD with the default skin ? |
|
|
|
|
|