Is your network reachable? YES Are you using a router? YES Did you set a static IP on the PC running Kai? i have enable upnp and i don't know Did you forward port 30000 to the static IP? dont know Did you click the globe after forwarding to see if your network goes reachable? yes What console are you using? Xbox 360 Is your console being detected? yes Brief description of your network setup: I have Connected My PC to Xbox 360 by LAN and my PC to Internet by a Wireless USB Model numbers of the router, and modem? MOTOROLA cpei35775 Do you use a software firewall? What brand? Have you made any changes to it? No, i didnt use any software for the firewall and havent made any changes Operating System? Windows 7 Problem description? When i try to sign in to xlink kai on my Xbox 360 my PC get an unknown message Look for the image
Code:
# XLink Kai Engine Configuration
# Version 7.4.24
[KaiUserConfig]
# Username for automatic login
kaiUsername=********
# Password for automatic login
kaiPassword=********
# Use automatic login
kaiAutoLogin=1
# Use Web User Interface instead of GUI program
kaiWebUI=1
# Automatically launch Kai user interface
kaiLaunchUI=0
# MBCS code page for asian character sets
kaiCodepage=0
# Language
kaiLanguage=en
# Enable port address translation
kaiPAT=1
# Set UDP port for peer-to-peer connections (0=random)
kaiPort=0
# Set UDP port for deep connections (0=disable)
# Do not enable this unless you are sure that you require deep resolution
kaiDeepPort=0
# Set TCP port for Web UI connections (connect with http://127.0.0.1:[portnumber]/)
# Default is 34522 - this does not need to be changed in most cases. You DO NOT need to forward this port in your router.
kaiWebUIPort=34522
# Use PSSDK or Winpcap
kaiLib=pssdk
# Autodetect Proxy Server
kaiProxyAutoDetect=1
# Proxy server IP address
kaiProxyServer=!
# Proxy server port
kaiProxyPort=0
# Network adapter (!=autodetect)
kaiAdapter=!
# Automatically shut down engine after x minutes (0=never)
kaiTimeout=0
# Automatically shut down engine when UI closes
kaiUIClose=0
# Accept connections from user interfaces on other computers
kaiAcceptRemote=1
giggyprince Team XLink Moderator
Joined: 27 Feb 2011
Posts: 1206
Posted:
Sat Oct 06, 2012 9:19 pm
Have you set in your kai config under default profiles the profile to "seperate use engine pc" ? I dont know what error you are talking about all i can see in your pic is kai engine and a red marking around it in the left down corner. Could you describe the error you get in a more detailed way ?
Osama768 Kai Beginner
Joined: 06 Oct 2012
Posts: 10
Posted:
Wed Oct 10, 2012 1:47 pm
giggyprince wrote:
Have you set in your kai config under default profiles the profile to "seperate use engine pc" ? I dont know what error you are talking about all i can see in your pic is kai engine and a red marking around it in the left down corner. Could you describe the error you get in a more detailed way ?
when i sign in the error occurs when I retry to sign in it said no xlink engine found on network and no i have not set to ''separated use - PC'' ALL i know I have told you
View next topic View previous topic
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum