All set, disconnecting, tried everything i could.

Kai Beginner Joined: 17 Jan 2013 Posts: 1

Is your network reachable? Yes.
Are you using a router? Yes, Arris.
Did you set a static IP on the PC running Kai? Yes, IPv4
Did you forward port 30000 to the static IP? Yes.
Did you click the globe after forwarding to see if your network goes reachable? Yes
What console are you using? PSP Fat, 6.60 Neur0n.
Is your console being detected? Yes, both Bridge and Kai.
Brief description of your network setup: WPA-2 - AES - No firewalls, DMZ bypassed for this IP, UPnP enabled.
Model numbers of the router, and modem? Arris TG862
Do you use a software firewall? What brand? Have you made any changes to it? Don't use any.
Operating System? Windows 7 Ultimate x64.
Problem description? Consistent disconnecting.

Full note:
Ok, i've been having this problem with my PSP's connection, let's say it simply won't work.
I tried using MHPTunnel, nothing
So i installed Kai, and followed the guide step by step, port-forwarding seemed fine, but the error made me turn it off to the default Kai auto-porting. (Port and Deep Port in 0, 30k deleted from the router.)
So everything seems fine, network is reachable in the metrics, PSP is detected.
I'm using Neur0n's plugin for 6.60, PSPAdhocToUSB.prx, since the one i used (Downloaded from here.) wasn't working, or i thought it wasn't.
The bridge is working just fine, i had little problems with the USB cords, but solved them with another cord, the connection is stable.
So, the Port-Forwarding should be enabled if i reach Kai, right?
I do not know how to confirm that using the auto-port config on Kai, since well, the Port is 0.
The problem is in the game Monster Hunter (Portable 3rd, and Freedom Unite.) i can enter the guild Hall, share cards, whatever. But then the mission, i get disconnected every single time after less than 30 seconds, in both the Tunnel and Kai.
I've tried everything, browsed through here but i don't get an answer, this is somehow frustrating, and i'm suspecting it has something to do with my PSP's network card.
My port-forwarding doesn't have any tutorial around, but it's not necessary since you just have to Add a Virtual Server, my config. with the non-automatic Kai setting was:
Inbound Port: 30000 to 30000
Format: Both and then UDP (Tried both separately, can't stack them together.)
Private I.P. Address: My wireless card's Static IP, Ralink card by the way.
Local Port: 30000 to 30000
I am not clear of what to input on the IP and Local tabs, but i'm guessing the IP is my current card's one, and Local Port is 30000

I've tried running it with PAT on Kai (And without it.)
With Single Thread and Multi-thread on the bridge
Haven't tried with PSDDK instead of winpcap yet, but i doubt that'd be necessary.
Here's my config.

# XLink Kai Engine Configuration
# Version 7.4.26
[KaiUserConfig]
# Username for automatic login
kaiUsername=PinkRathian
# Password for automatic login
kaiPassword=**********
# Use automatic login
kaiAutoLogin=1
# Use Web User Interface instead of GUI program
kaiWeb=1
# Automatically launch Kai user interface
kaiLaunchUI=1
# User interface program name
kaiUI=kaiUI.exe
# Web UI Password
kaiHTTPPassword=!
# Web UI Skin
kaiSkin=!
# Automatically open chat
kaiAutoOpenChat=0
# Enable PSP Mode (Automatic SSID detection)
kaiPSPMode=0
# Disable sleep mode
kaiDisableSleep=0
# MBCS code page for asian character sets
kaiCodepage=0
# Language
kaiLanguage=en
# Enable port address translation
kaiPAT=1
# Set UDP port for peer-to-peer connections (0=random)
kaiPort=0
# Set UDP port for deep connections (0=disable)
# Do not enable this unless you are sure that you require deep resolution
kaiDeepPort=0
# Set TCP port for Web UI connections (connect with http://127.0.0.1:[portnumber]/)
# Default is 34522 - this does not need to be changed in most cases. You DO NOT need to forward this port in your router.
kaiWebUIPort=34522
# Use PSSDK or Winpcap
kaiLib=winpcap
# Autodetect Proxy Server
kaiProxyAutoDetect=1
# Proxy server IP address
kaiProxyServer=!
# Proxy server port
kaiProxyPort=0
# Network adapter (!=autodetect)
kaiAdapter=\Device\NPF_{4FB45008-AF3E-4596-97F5-D13EA2FCA760}
# Automatically shut down engine after x minutes (0=never)
kaiTimeout=0
# Automatically shut down engine when UI closes
kaiUIClose=1
# Accept connections from user interfaces on other computers
kaiAcceptRemote=0

The autodetect feature resets every time i open Kai after restarting, not sure why
But disregarding it i always switch to the MSLoopbackAdapter.
Some possible issues i've thought of are:

I haven't tried allowing the Ports for the LoopBack's Static I.P.
I'm running an IPv4 adapter. (I doubt about this one.)
My network card detects my router as with the wrong Properties (And they are right, set to WPA-Personal with AES, the only difference is the router has TKIPAES.) but it connects anyway, with a disconnect every hour or so.
(Marked as with the wrong setting, yet connects automatically, 19mb Up, 2 Down, Ping below 30.)
And i do not have a Port Trigger setup, but i don't see that as necessary on the tutorials.

I hope you can help me settle this issue, thanks for your support.