Network not yet reachable 2NIC cards and router

Posted: Thu Nov 11, 2004 7:01 pm

Is your network reachable? No
Are you using a port-forward? Am trying but don't really know what ports to open (draytek2600 router)
Is your console being detected? Yes
Brief description of your network setup: NIC to Xbox(static IP), then second NIC to LAN/Router
Do you use a software firewall? What brand? Have you made any changes to it? No
Operating System? Win2k
Problem description? Cannot get the network to be reachable at all and am a little unsure about what kind of ports I should open to try this or what the correct port in the userconfig file should be.

[KaiUserConfig]
kaiUsername=****
kaiPassword=*******
kaiPort=8603
kaiDeepPort=0
kaiAccept=ALL
kaiTimeout=NEVER
kaiNIC=3
kaiLaunch=BOTH
kaiHomebrew=OFF
kaiPAT=OFF
kaiAutoLogin=ON
kaiAllowBadNICS=OFF
kaiWireless=
kaiUI=Default

Thanks very much for your time and sorry if I'm being dumb.

Team XLink Administrator Joined: 21 May 2004 Posts: 3354

You have 8603 set as the open port in the Kai config. Is this the one you are trying to open on the router?

Posted: Fri Nov 12, 2004 5:46 pm

I basically set from an lower port number through to a higher one.

Would it be better if I only open the exact port in the config file?
Also I'm not sure whether it should TCP or UDP?

Thanks very much!

Posted: Fri Nov 12, 2004 6:53 pm

I've managed to get this working now through a probable series of accidental clicks in the right direction!

Thanks very much for your assistance so far. Smile