PSP AdHocToUSB configuration stuck (SOLVED)

Kai Beginner Joined: 09 Feb 2014 Posts: 2

Is your network reachable? Yes.*
Are you using a router? Yes.
Did you set a static IP on the PC running Kai? Yes.
Did you forward port 30000 to the static IP? Yes.
Did you click the globe after forwarding to see if your network goes reachable? Yes (*it is after clicking globe).
What console are you using? PSP 3k 6.60 CFW
Is your console being detected? No
Brief description of your network setup: Computer to router to modem, hardlines.
Model numbers of the router, and modem? x
Do you use a software firewall? What brand? Have you made any changes to it? Windows firewall is off. Router firewall is off.
Operating System? w7 x64
Problem description?

Hello,

I hope this is the right place for this.

I have been attempting to reconnect to kai after a couple of years via the adhoc to usb method. After following the tutorial as closely as I was able, I am stuck trying (I think this is the problem) to apply the Type B driver to my PSP. I realize there is a copious amount of information regarding this issue available on this site and others, however it has not seen me through to the mhfu arena :/

As it stands:
-win7 x64
-cfw 6.60b10
-Installed winpcap
-PFwrd 30000
-ahoctousb prx in seplugins
-game.txt contains ms0:/adhoctousb text
-configured kai
-installed type b driver manually (dev manager)
-adhoctousb plugin ENABLED on recovery menu
-loopback adapter configured
-network reachable

My PSP is not being detected by the bridge, metrics, inf-wizard (for type b installation?) or in any type b scenario. I've been troubleshooting under the assumption there is an problem with my plugin config but I can't seem to find it.

I hope this is sufficient information, I can provide more upon request.
Any help would be wonderful!

Thanks[/b]