Author |
Message |
Dark_spirit
Kai Beginner
Joined: 30 May 2014
Posts: 4
|
Posted:
Fri May 30, 2014 6:51 pm |
|
As a FastWeb user I know I need to set the deep port to a certain value (and I think I need to use PSSDK), but I can't: every time I change its value from the XLink Kai Configuration Tool it remains "undefined" when I open again the tool. Same thing for PSSDK: I select it, but every time it switches back to Winpcap (other settings seem to be fine, they remember the changes). I have even tried to manually edit the kaiUserConfig.txt file and set it to read-only mode so that I could keep the lines regarding the deep port and the kailib, which got deleted every time I opened the configuration tool.
Is your network reachable? Not Yet
Are you using a router? Yes
Did you set a static IP on the PC running Kai? I did but to no avail, now I switched back to dynamic since my router supports Upnp.
Did you forward port 30000 to the static IP? Same as above, I did and it didn't work, and I plan to use Upnp.
Did you click the globe after forwarding to see if your network goes reachable? Yes
What console are you using? Xbox 360
Is your console being detected? Yes
Brief description of your network setup: PC to router through wifi and Xbox 360 to router through ethernet.
Model numbers of the router, and modem? Technicolor TG582n
Do you use a software firewall? What brand? Have you made any changes to it? Disabling both the Kaspersky firewall and the Windows one did not make things better.
Operating System? Windows 7 64-bit Ultimate
Problem description? Can't change Deep Port and Packet Capture Engine |
|
|
|
|
[1up]Stickey
Team XLink Administrator
Joined: 17 Dec 2007
Posts: 844
|
Posted:
Fri May 30, 2014 9:49 pm |
|
Deep Port and PSSDK were removed on kai's last revision. Where are you
getting stuck when you try and connect? |
|
|
|
|
Dark_spirit
Kai Beginner
Joined: 30 May 2014
Posts: 4
|
Posted:
Sat May 31, 2014 9:29 am |
|
What do you mean exactly?
Could I use the past version of Kai if I wanted to? |
|
|
|
|
SgtLegend
TX Server Nerd
Joined: 27 Nov 2007
Posts: 5261
Location: Melbourne, AU
|
Posted:
Sat May 31, 2014 10:27 am |
|
|
|
|
Dark_spirit
Kai Beginner
Joined: 30 May 2014
Posts: 4
|
Posted:
Sat May 31, 2014 11:26 am |
|
Actually yes. As I said, I'm a FastWeb user and this ISP is known to be causing problems with Kai. I've been scouring the internet lately and it looks like FastWeb users need to swap their port and deep port. I'll try version 7.4.27 and let you know. Thanks for the help. |
|
|
|
|
Dark_spirit
Kai Beginner
Joined: 30 May 2014
Posts: 4
|
Posted:
Sat May 31, 2014 2:24 pm |
|
7.4.27 didn't let me use PSSDK nor set the deep port. I had to switch back to 7.4.26.
I tried all kinds of combinations, but none worked, always not reachable. I'm afraid I can't do much about it, it must depend on my provider. |
|
|
|
|
karmic
Kai Regular
Joined: 02 Jan 2006
Posts: 172
|
Posted:
Sun Jun 01, 2014 4:35 am |
|
I have two questions.
[Q1] Do you have any plans to remove it from Kai Config UI in version 7.4.27 or later?
[Q2] Do you have any plans to revive Deep Port in newer version? |
_________________ XLinkKai on Linux ( http://www37.atwiki.jp/linux_kai/ ) |
|
|
|
SgtLegend
TX Server Nerd
Joined: 27 Nov 2007
Posts: 5261
Location: Melbourne, AU
|
Posted:
Sun Jun 01, 2014 4:38 am |
|
Quote: |
[Q1] Do you have any plans to remove it from Kai Config UI in version 7.4.27 or later? |
The WebUI is shared between all versions of the engine so an update will be created that removes it on versions above that of 7.4.26.
Quote: |
[Q2] Do you have any plans to revive Deep Port in newer version? |
At this point in time, no. |
Last edited by SgtLegend on Sun Jun 01, 2014 11:10 pm; edited 1 time in total |
|
|
|
MeanMF
Team XLink Administrator
Joined: 11 Nov 2004
Posts: 5024
|
Posted:
Sun Jun 01, 2014 8:19 pm |
|
Deep Port is an old feature that hasn't done anything in at least five years. We removed it to avoid confusion. |
|
|
|
|
|