Author |
Message |
Playboi619
Kai Beginner
Joined: 16 Sep 2004
Posts: 5
Location: USA - California
|
Posted:
Fri Nov 12, 2004 3:46 pm |
|
Is your network reachable? Yes
Are you using a port-forward? Not Sure
Is your console being detected? No
Brief description of your network setup: Linksys Wireless Access Point+ Cable/DSL Router with 4-Port Switch hooked up to the computer and modem and Linksys Wireless Ethernet Bridge connected to Xbox.
Do you use a software firewall? What brand? Have you made any changes to it? No
Operating System? Windows XP SP2
Problem description? Xlink is just not detecting my xbox
kaiUserConfig.txt
kaiPort=0
kaiDeepPort=0
kaiAccept=LOCAL
kaiTimeout=NOUI
kaiNIC=0
kaiLaunch=BOTH
kaiHomeBrew=OFF
kaiWireless=
kaiUI=Default |
|
|
|
|
[FUNK]
Team XLink Administrator
Joined: 21 May 2004
Posts: 3354
|
Posted:
Fri Nov 12, 2004 4:29 pm |
|
Okay you need to set up a port forward. Log into your router and open 30000 UDP for the IP of your computer "not the Xbox". Then open the XLink Kai config tool and change the Kai port from 0 to 30000. Then change your NIC to the NIC computer. Then log into Kai and report back when done. |
_________________ Funk! |
|
|
|
dfunked
Team XLink Administrator
Joined: 25 Apr 2004
Posts: 7005
Location: Australia - VIC
|
Posted:
Fri Nov 12, 2004 11:13 pm |
|
What model is that Wireless Ethernet Bridge? Linksys WET11 I presume? It might not do MAC translation on its own (or maybe you can update the firmware for it), so you'll have to enter the MAC address relationships into the Kai Config. Tool and click on 'Wireless'.
Click 'Help' to find out which MAC address goes where.
Of most crucial importance though is that the PC remains hardwired to the router. Is it? |
_________________
|
|
|
|
Playboi619
Kai Beginner
Joined: 16 Sep 2004
Posts: 5
Location: USA - California
|
Posted:
Sat Nov 13, 2004 12:43 am |
|
i did both of what u told me and its still not detecting my console. But let me keep trying with other games. And yes its a wet11 |
|
|
|
|
dfunked
Team XLink Administrator
Joined: 25 Apr 2004
Posts: 7005
Location: Australia - VIC
|
Posted:
Sat Nov 13, 2004 10:34 am |
|
The older WET11's have issues with MAC translation. Have you made positive you're running the latest firmware on it?
And also, are you sure you put the wireless MAC settings in correctly? ie. the right device in "Virtual" and "Real" MAC address?
From the 'Help' in the Config. Tool
Quote: |
Wireless
If you are using a wireless bridge to get your console online wirelessly, there may be a possibility that the device cannot handle MAC translation. If that is the case, Kai can perform the translation for you. For personal support on wireless networks, we suggest visiting the Official XLink Forums and explaining your problem thoroughly.
"Real" MAC Address: This is the actual MAC address of the console. Enter this in the field without any spaces or colons.
Virtual MAC Address: This is the the wireless bridge's MAC address. Generally you will find it printed on the bottom of the device. Enter this in the field without any space or colons. |
|
_________________
|
|
|
|
Playboi619
Kai Beginner
Joined: 16 Sep 2004
Posts: 5
Location: USA - California
|
Posted:
Sun Nov 14, 2004 12:07 am |
|
im pretty sure i have the right mac addresses.the "real" mac address is the one on my modem right?and the "virtual" mac address is the one on the wireless bridge(Wet11)?-
Edit: Ok well im trying to upgrade the firmware for the router but when i click upgrade it says i have the wrong file. Can u guys help me with this too? |
|
|
|
|
dfunked
Team XLink Administrator
Joined: 25 Apr 2004
Posts: 7005
Location: Australia - VIC
|
Posted:
Sun Nov 14, 2004 1:47 am |
|
Playboi619 wrote: |
im pretty sure i have the right mac addresses.the "real" mac address is the one on my modem right?and the "virtual" mac address is the one on the wireless bridge(Wet11)?-
Edit: Ok well im trying to upgrade the firmware for the router but when i click upgrade it says i have the wrong file. Can u guys help me with this too? |
I guess you ignored what I wrote :/ It's right up there ^^^ what goes where, and I simply pasted that from the Help that loads up by pressing 'Help' in the Kai Config. Tool.. |
_________________
|
|
|
|
Playboi619
Kai Beginner
Joined: 16 Sep 2004
Posts: 5
Location: USA - California
|
Posted:
Sun Nov 14, 2004 1:53 am |
|
lol sorry!!!Yah i got the right mac addresses then and i just upgraded the firmware.Ill edit later if it works
Edit: Still not working |
|
|
|
|
Playboi619
Kai Beginner
Joined: 16 Sep 2004
Posts: 5
Location: USA - California
|
Posted:
Tue Nov 16, 2004 1:17 am |
|
|
|
|
dfunked
Team XLink Administrator
Joined: 25 Apr 2004
Posts: 7005
Location: Australia - VIC
|
Posted:
Tue Nov 16, 2004 1:57 pm |
|
|
|
|
|