Author |
Message |
Fury-K96
Kai Beginner
Joined: 10 Jul 2016
Posts: 6
|
Posted:
Sun Jul 10, 2016 2:55 am |
|
This started to happen since i downgraded from Windows 10 to 7.
I have WinPcap instaled. Both PC and PS2 are connected to the same router using a ETH Cable.
It was working on Win 10 before I downgraded.
It is reachable, detects my console, i had to set the Kai port to 30000 because it was showing 53512.
I tried unistalling AVG FreeAntivirus, Reinstalling WinPcap and XLink Kai. Tried enabling/disabling PSSDK, PAT.
arghhhhhhh. Help |
|
|
|
|
nextgenrules
Kai Regular
Joined: 26 Feb 2013
Posts: 114
|
Posted:
Sun Jul 10, 2016 12:08 pm |
|
When you reinstalled kai etc, did you redownload the setup file? If I remember correctly, there's a different installer for windows 10, I think you need the older one... |
_________________ https://localbitcoins.com/?ch=rkv4 |
|
|
|
Fury-K96
Kai Beginner
Joined: 10 Jul 2016
Posts: 6
|
Posted:
Sun Jul 10, 2016 3:59 pm |
|
nextgenrules wrote: |
When you reinstalled kai etc, did you redownload the setup file? If I remember correctly, there's a different installer for windows 10, I think you need the older one... |
Yes, the 7.4.30. So i Need the 7.4.29 version so it Will work on Windows 7? |
|
|
|
|
SgtLegend
TX Server Nerd
Joined: 27 Nov 2007
Posts: 5261
Location: Melbourne, AU
|
Posted:
Sun Jul 10, 2016 11:41 pm |
|
nextgenrules wrote: |
When you reinstalled kai etc, did you redownload the setup file? If I remember correctly, there's a different installer for windows 10, I think you need the older one... |
That's incorrect, any version of 7.4 will work on Windows 10.
Quote: |
[...] i had to set the Kai port to 30000 because it was showing 53512. |
If your modem supports uPnP it's better to have your Kai Port set to 0 as the engine will select a port to connect through.
Have you tried disabling your Windows firewall temporarily?
http://www.sevenforums.com/tutorials/522-windows-firewall-turn-off.html |
|
|
|
|
nextgenrules
Kai Regular
Joined: 26 Feb 2013
Posts: 114
|
Posted:
Mon Jul 11, 2016 5:20 pm |
|
|
|
|
Fury-K96
Kai Beginner
Joined: 10 Jul 2016
Posts: 6
|
Posted:
Thu Jul 14, 2016 3:24 am |
|
IF I reorb i became unreachable.... It's so annoying. The Local Port on keeps changing if uPnP is On. If i set the port manually to 30000 the 1st connect I will be reachable, but if I need to reorb I became unreachable againg.
Arghhhhhhhhhhhhhhh! |
|
|
|
|
Fury-K96
Kai Beginner
Joined: 10 Jul 2016
Posts: 6
|
Posted:
Thu Jul 14, 2016 3:27 am |
|
on My router's UPnP page XLink has forwarded so many ports and didn't closed them back.
Code: |
30000 192.168.1.4 30000 UDP XLink
63547 192.168.1.4 63547 UDP XLink
51072 192.168.1.4 51072 UDP XLink
60699 192.168.1.4 60699 UDP XLink
53610 192.168.1.4 53610 UDP XLink
30000 192.168.1.4 30000 UDP XLink
50426 192.168.1.4 50426 UDP XLink
53621 192.168.1.4 53621 UDP XLink
57555 192.168.1.4 57555 UDP XLink
49348 192.168.1.4 49348 UDP XLink
54721 192.168.1.4 54721 UDP XLink
53192 192.168.1.4 53192 UDP XLink
30000 192.168.1.4 30000 UDP XLink
52386 192.168.1.4 52386 UDP XLink
54356 192.168.1.4 54356 UDP XLink
60392 192.168.1.4 60392 UDP XLink
55387 192.168.1.4 55387 UDP XLink
30000 192.168.1.4 30000 UDP XLink
|
|
|
|
|
|
[1up]Stickey
Team XLink Administrator
Joined: 17 Dec 2007
Posts: 844
|
Posted:
Fri Jul 15, 2016 12:12 am |
|
I'm on skype most nights if you need help.
My skype tag is lstickeyl |
|
|
|
|
|