| Author |
Message |
gerwinf
Kai Beginner
Joined: 07 Nov 2004
Posts: 7
Location: Netherlands
|
 Posted:
Sun Nov 14, 2004 1:21 am |
  |
Is your network reachable? Not Yet
Are you using a port-forward? Yes
Is your console being detected? No
Brief description of your network setup: 1pc wireless on a router, 1 xbox with utp on a router.
Do you use a software firewall? No
Operating System? XP
Problem description? I have a speedtouch 570 router with a wireless internet connection to the internet. My Xbox is connected with UTP on the same router. I forwarded a port and i configured the same port in the configuration of xlink. I also used the 'wireless translation' option. Please help me!
[KaiUserConfig]
kaiPort=50
kaiDeepPort=0
kaiAccept=ALL
kaiTimeout=NOUI
kaiNIC=0
kaiLaunch=BOTH
kaiHomebrew=OFF
kaiPAT=OFF
kaiAutoLogin=ON
kaiAllowBadNICS=ON
kaiWireless=000d3a5f7a24;0090d0931b80;
kaiUI=Default |
|
|
    |
|
dfunked
Team XLink Administrator
Joined: 25 Apr 2004
Posts: 7005
Location: Australia - VIC
|
| Posted:
Sun Nov 14, 2004 2:43 am |
|
http://www.teamxlink.co.uk/?go=quickstart (Read about Incompatible Wireless Network Setups).
Btw, port-forwarding port 50 isn't recommended. Use 30000 as it's a private class, 50 could be in use by some other program. |
_________________
 |
|
|
|
gerwinf
Kai Beginner
Joined: 07 Nov 2004
Posts: 7
Location: Netherlands
|
| Posted:
Sun Nov 14, 2004 11:08 am |
|
If i take port 30000 the program keeps doesn't go further than 'attaching to orbital'.
One question....Do i have to use a crosscable if i have this configuration? |
|
|
|
|
dfunked
Team XLink Administrator
Joined: 25 Apr 2004
Posts: 7005
Location: Australia - VIC
|
| Posted:
Sun Nov 14, 2004 12:12 pm |
|
| dfunked wrote: |
http://www.teamxlink.co.uk/?go=quickstart (Read about Incompatible Wireless Network Setups).
Btw, port-forwarding port 50 isn't recommended. Use 30000 as it's a private class, 50 could be in use by some other program. |
|
_________________
|
|
|
|
gerwinf
Kai Beginner
Joined: 07 Nov 2004
Posts: 7
Location: Netherlands
|
| Posted:
Sun Nov 14, 2004 12:39 pm |
|
Done all that, still doesnt work. |
|
|
|
|
dfunked
Team XLink Administrator
Joined: 25 Apr 2004
Posts: 7005
Location: Australia - VIC
|
| Posted:
Sun Nov 14, 2004 12:43 pm |
|
I specifically highlighted the important part in bold for a reason - your network card drivers don't allow you to perform in promiscious mode. Tell me what WLAN card is in your PC and I will find out, don't get your hopes up. Almost 99% of WLAN cards don't have drivers that let you use promiscious mode, which is bloody annoying.
No need for a crossover cable to the router. However I should point out that the WLAN card not being able to perform in promisc. mode *shouldn't* stop your network from being reachable. In that case I suggest you take a look and make sure port 50 on this modem / router is allowing and forwarding UDP traffic, not TCP.
Oh, and remove the wireless relationship you set up in the Kai Config. Tool. |
_________________
|
|
|
|
gerwinf
Kai Beginner
Joined: 07 Nov 2004
Posts: 7
Location: Netherlands
|
| Posted:
Sun Nov 14, 2004 1:05 pm |
|
| dfunked wrote: |
I specifically highlighted the important part in bold for a reason - your network card drivers don't allow you to perform in promiscious mode. Tell me what WLAN card is in your PC and I will find out, don't get your hopes up. Almost 99% of WLAN cards don't have drivers that let you use promiscious mode, which is bloody annoying.
No need for a crossover cable to the router. However I should point out that the WLAN card not being able to perform in promisc. mode *shouldn't* stop your network from being reachable. In that case I suggest you take a look and make sure port 50 on this modem / router is allowing and forwarding UDP traffic, not TCP.
Oh, and remove the wireless relationship you set up in the Kai Config. Tool. |
Thank you for helping me. I have a alcatel speedtouch 570 wireless router and a usb accesspoint which is connected to my pc. The Xbox is connected on this router with a normal utp cable. |
|
|
|
|
dfunked
Team XLink Administrator
Joined: 25 Apr 2004
Posts: 7005
Location: Australia - VIC
|
| Posted:
Sun Nov 14, 2004 1:20 pm |
|
| Quote: |
| usb accesspoint which is connected to my pc |
That's what I need the model of thanks. |
_________________
|
|
|
|
gerwinf
Kai Beginner
Joined: 07 Nov 2004
Posts: 7
Location: Netherlands
|
| Posted:
Sun Nov 14, 2004 1:26 pm |
|
|
|
|
gerwinf
Kai Beginner
Joined: 07 Nov 2004
Posts: 7
Location: Netherlands
|
| Posted:
Sun Nov 14, 2004 9:53 pm |
|
Im thinking of getting a new (wired) router. Also a lot faster because now i have 11 mbit. |
|
|
|
|
[FUNK]
Team XLink Administrator
Joined: 21 May 2004
Posts: 3354
|
| Posted:
Sun Nov 14, 2004 10:00 pm |
|
I would if I were you. It also makes troubleshooting a little easier. So if this is your choice report back when you have it so we know if you are sorted or not. Thanks! |
_________________
Funk! |
|
|
|
gerwinf
Kai Beginner
Joined: 07 Nov 2004
Posts: 7
Location: Netherlands
|
| Posted:
Mon Nov 15, 2004 4:03 pm |
|
Bought another router, problem solved. Thanks! |
|
|
|
|
|
|
SpeedTouch 120 Wireless USB Adapter.