Wireless Setup

Posted: Fri Nov 12, 2004 4:59 am

Is your network reachable? Not Yet
Are you using a port-forward? Not Sure
Is your console being detected? No
Brief description of your network setup: Linksys 2.4ghz 802.11g wireless network card on pc, actiontec dsl gateway modem/router, xbox wired to modem/router.
Do you use a software firewall? What brand? Have you made any changes to it? Not Sure.
Operating System? WindowsXP Pro + SP2
Problem description? Xlink dont show console

[KaiUserConfig]
kaiPort=0
kaiDeepPort=0
kaiAccept=LOCAL
kaiTimeout=NOUI
kaiNIC=0
kaiLaunch=BOTH
kaiHomebrew=ON
kaiPAT=ON
kaiAutoLogin=ON
kaiAllowBadNICS=OFF
kaiWireless=
kaiUI=Default

Posted: Fri Nov 12, 2004 9:17 am

http://www.teamxlink.co.uk/?go=quickstart

You are using Setup F. Please read the note about Setup F, namely

Quote:

Note: Setup F will only work for you if your wireless network card performs in promiscious mode. Please read the section on Incompatible Wireless Network Setups below for more information.

This is most likely the cause of the non-detected XBox. To get Netwokr Reachable, you just need to port-forward on that Actiontec DSL modem / router.

http://www.portforward.com/routers.htm (there's a few Actiontec models here).

Posted: Wed Nov 17, 2004 3:50 pm

no response in over a week

assuming problem solved