Network setup seems ok but cant see games

Posted: Tue Nov 23, 2004 1:25 am

[b]Is your network reachable? [/YES]
[b]Are you using a port-forward? [/YES]
[b]Is your console being detected? [/YES]
[b]Brief description of your network setup:[/Cable modem,Netgear router(RT314), LYNKSYS 5-port switch, XBOX]
[b]Do you use a software firewall? What brand? Have you made any changes to it? [/Sygate personal Firewall. I exit it to completely but still no good]
[b]Operating System? [/XP Home]
[b]Problem description? [/I manage to run XlinkKai on the PC. I can see the arenas and other usres. BUT on the Halo2 in the XBOX I dont see any available games at all! (on the PC client I get pings going, netwrok is reachable. It says the XBOX in configured succesfuly). I am using port 30000 forwarding.]

[KaiUserConfig]
kaiUsername=!
kaiPassword=!
kaiPort=0
kaiDeepPort=0
kaiAccept=LOCAL
kaiTimeout=NOUI
kaiNIC=0
kaiLaunch=BOTH
kaiHomebrew=OFF
kaiPAT=OFF
kaiAutoLogin=OFF
kaiAllowBadNICS=OFF
kaiWireless=
kaiUI=Default

Posted: Tue Nov 23, 2004 1:29 am

You're using a port forward on 30000 UDP, but you haven't put it into the Kai Config Tool under Kai Port.

With Sygate, follow the instructions set out in this thread

http://www.teamxlink.co.uk/forum/viewtopic.php?p=20890

Posted: Tue Nov 23, 2004 7:08 pm

ok. updated Kai Port.

Now I cant get it to Reach the Network...
(NOT YET)

Any ideas?

Thanks,

SG

Posted: Tue Nov 23, 2004 7:27 pm

Just to make sure,

Do I need to set the XBOX to Static IP (0.0.0.1)?
Or do I leave it as it is at DHCP dynamic IP?

SG

Posted: Wed Nov 24, 2004 1:19 am

Dontt worry about networking the XBox, it's irrelevant (unless you want to get XBMC working and stuff, in that case you would have already networked your XBox).

Remove the portforward from the router, and put Kai Port back to 0 in the Kai Config. Tool.

You didn't mention anythign about updating Sygate though?

Update: User did not respond within 5 days. Setting to Problem Solved.