Joined: 28 Nov 2004
Posts: 1
Location: United Kingdom
Posted:
Tue Nov 30, 2004 11:53 am
Is your network reachable? Yes
Are you using a port-forward? No
Is your console being detected? Yes - When I get it to run
Brief description of your network setup: Operating System? Windows 2003 Advanced Server. The server has 3 NICs. The first one is for broadband and is the internet connection. The second one is an OpenVPN TAP adapter running on 10.20.68.* and the third one is the LAN connection which is a 4 port ADMTek router card which sits on 10.20.72.*. Routing and remote access is configured and running nicely.
Problem description? Kai blue screens the server often when I launch the engine.
OK. I was using a network bridge, but having read an articale suggesting that KAI didn't like it, I removed it and setup two seperate subnets for my VPN and LAN. Kai is configured to use the ADMTek card. Kai was blue screening with a network bridge.
Kai ran nicely last night, but just blue screened when I rebooted the server and tried to start it. So I'm officially 1/2 with it. I am a little afraid to start it up again as I am working remotely and have no way of rebooting it from here.
Any ideas. The network bridge is a real pain. I prefer to be able to use it.
dfunked Team XLink Administrator
Joined: 25 Apr 2004
Posts: 7005
Location: Australia - VIC
Posted:
Wed Dec 01, 2004 12:04 am
The NIC you've selected is the one is connected to the console right?
Kai doesn't like network bridges (well the psSDK), but I would take a look if there's any driver updates for your NICs also.
*EDIT* no reply in couple of days, assuming problem solved -tizzo
View next topic View previous topic
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum