cannot detect xbox, zone alarm causing network not reachable

Posted: Fri Nov 12, 2004 1:26 am

Is your network reachable? Yes, When i disable zone alarm, not sure how to allow that traffic through
Are you using a port-forward? Yes
Is your console being detected? No
Brief description of your network setup: D-lin 302g connetced to a switch pc ip=10.1.1.3 xbox=10.1.1.4
Do you use a software firewall? What brand? Have you made any changes to it? Yes i use zone alarm, when on the network is unreachable
Operating System? WindowsXP Pro + SP2
Problem description? I am unable to detect my xbox, turn off zone alarm, doesnt make a difference, i have forwarded 10.1.1.3 and allowed port 8602, have port forwarded in my modem 0.0.0.1 and allowed 3704 for any protocal

[KaiUserConfig]
[KaiUserConfig]
kaiPort=8602
kaiDeepPort=0
kaiAccept=LOCAL
kaiTimeout=NOUI
kaiNIC=2
kaiLaunch=BOTH
kaiHomebrew=OFF
kaiPAT=OFF
kaiAutoLogin=ON
kaiAllowBadNICS=OFF
kaiWireless=
kaiUI=Default

Please help me! Thanks Smile

Posted: Fri Nov 12, 2004 2:40 am

Try leaving things on 'Autodetect and lock' in Kai Config. Go to windowsupdate and get driver updates if any also.

Posted: Fri Nov 12, 2004 3:13 am

hey

done as you said, no updates on the win update site for me
does my NAT modem affect finding the console at all?

when i ping 0.0.0.1 i get no reply, should it respond(this is when im running a system link game)

ive got zone alarm to allow it to connect to the network but i still cant detect xbox; does it have an icon and says xbox detected when it is?

Posted: Fri Nov 12, 2004 9:15 am

Nah shouldn't. In Kai Config. Tool under 'Autodetect and Lock', was the actual network card that you use to hook up to the XBox in teh list? If you use a USB ethernet adapter, you'll have to tick the 'Allow Dangerous NICs' checkbox.

I think you already have it in the list though, as kaiNIC = 2 when you first started, which means you'd already selected the particular NIC.

It could be Zone Alarm too. Even though you've disabled it, it could be stubborn and stopping it (disabling firewalls does *not* unblock ports).

There's a post made by DIE-HARD about ZA configuration. Search and ye shall find.

Posted: Fri Nov 12, 2004 9:49 am

ok thanks i'll have a search for the zone alarm stuff, might need to unistall and see if it works then

yeah had previously selected my nick and it is ethernet

i'll post back and see how i go, thanks for the help

Team XLink Administrator Joined: 21 May 2004 Posts: 3354

So any updates on your problem?

Team XLink Moderator Joined: 21 May 2004 Posts: 1215

No response in 12 days, so assuming problem is solved.