Networking (Not Another Newb)

Posted: Thu Mar 17, 2005 2:18 am

Hi there,

Here are the steps I took and my setup:

Setup - Xbox connected to my PC through a cross-over network cable in the ethernet port. PC connected via a Netgear WG311T wireless card to my router.

Steps -
Downloaded and install XLink Kai.
It said I was unreachable, so I port fowarded 30000 to 30000 UDP.
Started Kai again, still said I was unreachable.

Any advice/help would be appreciated.

Posted: Thu Mar 17, 2005 6:24 pm

You forwarded the port, but did you enter "30000" into the "Kai Port" field in kaiConfig?

XC

Team XLink Administrator Joined: 27 Aug 2004 Posts: 1826

And did you forward that port to the ip address of the pc running the Kai Engine?

Posted: Thu Mar 17, 2005 10:07 pm

Ah, sweet..set the port in Kai config and it looks like it is working fine now. I know this is off topic but do you need to forward any ports to be able to FTP into your Xbox (via Evox)?

Team XLink Administrator Joined: 27 Aug 2004 Posts: 1826

brcolow @ Thu Mar 17, 2005 11:07 pm wrote:

...I know this is off topic but do you need to forward any ports to be able to FTP into your Xbox (via Evox)?

No, you don't need to forward ports for that. Remember, both the xbox and the pc are in your local network. *should* you want to enable ppl from the internet to reach your xbox's ftp-server then you need to forward port 21 (ftp-port) to your xbox's ip #.

Kai Beginner Joined: 25 Mar 2005 Posts: 2 Location: Sweden

XCondor @ Thu Mar 17, 2005 6:24 pm wrote:

You forwarded the port, but did you enter "30000" into the "Kai Port" field in kaiConfig?

XC

Hi!

Im having the problems as brcolow had. I tried your tip as well, but without sucess...

Do you have any idea what my problem is? Ill be thankfull for any help!