Author |
Message |
5nak3
Kai Enthusiast
Joined: 06 Feb 2005
Posts: 224
Location: United Kingdom
|
Posted:
Sun May 07, 2006 2:44 pm |
|
Hey there, got xbmc running kai, no problems there i can join games and play games, again no problem there.
My problem is when i want to change arena. For instance i enter an arena in halo2 play for a bit and then get bored and wish to change arena, is there anyway to do this other than rebooting my xbox. Up till now the only way i can find to change arena is to eject the disc, reboot xbmc (both triggers, back and start) and then finding a new arena, reload halo2 sign in etc etc...
Sometimes i might have to enter 3 or 4 games before i find a good one, and i dont want to reboot the xbox multiple times, as it is annoying...also i am a bit concerned that it does no good to the xbox
So does anyone know of a way to aviod all this, or is this the only way to change arenas.
Also one other thing, if i do an in game reset and dont eject the tray instead of booting to xbmc the xbox boots straight into the game, is there someway to stopping thing. I have de-selected autolaunch xbox games but it had no effect
Ok well thanks in advance |
Last edited by 5nak3 on Mon May 08, 2006 12:31 pm; edited 1 time in total |
|
|
|
TA_Capt_America
Kai Regular
Joined: 14 Dec 2005
Posts: 97
|
Posted:
Sun May 07, 2006 3:43 pm |
|
You must go back to the kai UI to change arenas. If you wish not to reboot you can just fire up the Kai UI on your pc instead. I don't believe however that resetting your Xbox causes any damage. I do it all the time and have never had any problems out of my 3 boxes. As for your problems with the auto launch I don't understand why that isn't working. Have you tried a different build of XBMC? |
_________________
http://cr.chaosorder.org:8765/Butchers_Jams.m3u
|
|
|
|
5nak3
Kai Enthusiast
Joined: 06 Feb 2005
Posts: 224
Location: United Kingdom
|
Posted:
Sun May 07, 2006 5:14 pm |
|
ok thanks for the quick reply....well i changed build (i think mine was a fair few months old) and i sorted the reset problem....but now something else has happened.
Whenever i press play from the kai UI menu instead of loading halo 2, it loads mimesis....and well thats not a good thing.
Anyone know what is wrong? |
|
|
|
|
TA_Capt_America
Kai Regular
Joined: 14 Dec 2005
Posts: 97
|
Posted:
Mon May 08, 2006 10:40 pm |
|
|
|
|
xjustsumloserx
Kai Beginner
Joined: 24 May 2004
Posts: 15
Location: USA - Texas
|
Posted:
Thu May 11, 2006 9:59 pm |
|
I have the EXACT same problem and it seems no one knows the answer to this
I click launch game (its the disk not on my HD) and it loads up mimesis. anyone ever figure thsi out? |
|
|
|
|
5nak3
Kai Enthusiast
Joined: 06 Feb 2005
Posts: 224
Location: United Kingdom
|
Posted:
Fri May 12, 2006 1:32 pm |
|
yeah mine loads from the disc as well since i saw no point in uploading halo2 onto the hdd...however i think i may have a solution. I dont know if this is actually the problem but i noticed that the icon for the halo2.xbe and mimesis.xbe are identical, maybe the xbox check hdd first and when it runs into the mimesis.xbe icon it loads that.
I doubt this is the problem simply becasue each xbe has its own key doesn't it? but it is the only explaination i can think of.
Also i found if u join ur arena that you want to join...go back to the XBMC homepage u can just press the little arrow on the bottom of the screen to launch halo 2 and u'll have that arena available to play once u get into the lobby.
Oh and before i forget before i upgraded to the t3ch build i didn't have this problem so maybe its just the t3ch build that does that. However as stated previously in this topic my previous xbmc build was a number of months old. |
|
|
|
|
5nak3
Kai Enthusiast
Joined: 06 Feb 2005
Posts: 224
Location: United Kingdom
|
Posted:
Sat May 13, 2006 11:10 pm |
|
OK i done some reasearch, i hosted a game of outrun2006 all done through the XBMC dash....and when i pressed play from the kai UI menu on the dash it actually loaded the game perfectly (this was off a disc).
This has actually given me i believe some evidence to prove my theory that when u press play the UI looks for the defaul.xbe icons rather than the xbe key....so erm anyone know what to do?
I might label the mimesis xbe, mimesis.xbe and see what happens. However if i did this then i wont be able to access mimesis through the app's menu as the xbox will not recognise mimesis.xbe...
will post later with update. |
|
|
|
|
5nak3
Kai Enthusiast
Joined: 06 Feb 2005
Posts: 224
Location: United Kingdom
|
Posted:
Sat May 20, 2006 10:47 pm |
|
righto solved it. From what i gather when you press play the in the XBMC menu kai looks at the icon for each xbe (starting with HDD). Mimesis being located on HDD with the halo 2 icon is what XBMC finds first and so load that.
In order to be able to play the game off ur disc when you press play, go to
'my files'->'E:/'-> 'Apps'->'Mimesis'-> find default.xbe press your white button rename that to mimesis.xbe and your ready to go. Obviously change the paths i mentioned to suit ur xbox.
By doing this however one slight problem is that the xbox does not recognise mimesis.xbe and as such if you want to load up mimesis then you will have to go my files-> E:/->Apps->Mimesis->Mimesis.xbe
However since i hardly use mimesis not a big issue for me. *NOTE* with the 06.06.06 tech build and the MC360 skin you do not have to go through all the files and folders as the dash now recognises mimesis as an app... |
|
|
|
|
|