Author |
Message |
Kozumura
Kai Beginner
Joined: 31 Aug 2007
Posts: 3
|
Posted:
Mon Sep 17, 2007 1:52 am |
|
So I followed that instruction guide step by step. I managed to get my network card to connect to my PSP however Xlink Kai does not detect my system when I check the diagnoise mode.
I am using a NETGEARWG311T Adapter. |
|
|
|
|
Himo
Kai Beginner
Joined: 02 Aug 2006
Posts: 18
|
Posted:
Mon Sep 17, 2007 2:35 am |
|
from most guides I see:
Enable PAT should be ticked and
Accept Any IP instead of local ip...see if that works |
|
|
|
|
Kozumura
Kai Beginner
Joined: 31 Aug 2007
Posts: 3
|
Posted:
Mon Sep 17, 2007 3:40 am |
|
Okay, I enabled the PAT but now when I start it, XLINK KAI gets the "has encountered a problem and must be shut down" message. |
|
|
|
|
Himo
Kai Beginner
Joined: 02 Aug 2006
Posts: 18
|
Posted:
Mon Sep 17, 2007 5:45 pm |
|
Kozumura wrote: |
Okay, I enabled the PAT but now when I start it, XLINK KAI gets the "has encountered a problem and must be shut down" message. |
Try reinstalling kai then setting up everything w/ the proper settings (including PAT as I suggested). I had a problem where kai crashed once and no matter what I did, I couldn't reopen it until I reinstalled it. |
|
|
|
|
ChaoticInfinityX
Kai Enthusiast
Joined: 29 May 2006
Posts: 204
|
Posted:
Mon Sep 17, 2007 6:36 pm |
|
How about some info as to what card or adapter you are using. You can't just use any network card and expect it to work. You need a dedicated Wifi card that works in promiscuous mode or an adapter with the same feature like a Wifi Max. |
_________________ PS3N/XTag: ChaoticInfinityX
"There is growth in defeat... Prepare to grow!!!"
|
|
|
|
|
|
View next topic
View previous topic
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
|
Powered by phpBB
© 2001, 2002 phpBB Group :: Theme by Daz ::
All times are GMT
| |