Is your network reachable? No
Are you using a port-forward? Yes/No I dont understand it
Is your console being detected? Yes
Brief description of your network setup: I'm running WinXp home SP2. I have a D-Link 604 router that is connected to my PC and my Xbox with RJ-54 Cat 5 patch cables.
Do you use a software firewall? What brand? Have you made any changes to it? I use Zone Alarm. It is disabled right now, but i need it to allow XLink to access the net.
Operating System? XP home SP2
Problem description? On the XLink Kai diagnostic page it says Network Reachable: Not Yet. I cant figure out how to fix this. Also on my xbmc my game do not show up in the list. I am running games off the hard drive.
Joined: 26 May 2004
Posts: 274
Location: USA - Florida
Posted:
Sun Nov 07, 2004 7:19 pm
Your private IP address is not correct.
Click Start - then Run.
Type CMD and press enter.
Type IPCONFIG and press enter.
That is the IP address you use in the router config for Private IP address.
For the protocol change it from BOTH to UDP.
In Kai Config change the value of Kai Port to 30000
That should fix your problems, hopefully. Let us know if it doesn't.
Sinister Kai Beginner
Joined: 07 Nov 2004
Posts: 5
Location: Canada
Posted:
Sun Nov 07, 2004 7:41 pm
Ok i changed what you told me to and i'm still getting Network Reachable: Not Yet. And after changing the IP in the router settings on my Kai diag page it still shows this IP 24.203.111.240
On my xbox i have the settings as follows
IP: 192.168.1.5
Default Gateway: 24.203.111.240
would you suggest i change anything in there?
Sinister Kai Beginner
Joined: 07 Nov 2004
Posts: 5
Location: Canada
Posted:
Sun Nov 07, 2004 7:47 pm
YES!! Ok i changed my Xbox default gateway to the IP 192.168.1.100 and it worked! i'm going to play halo 2. THANKS!
dfunked Team XLink Administrator
Joined: 25 Apr 2004
Posts: 7005
Location: Australia - VIC
Posted:
Sun Nov 07, 2004 11:57 pm
Using port 21 as a port-forward is not recommended (especially if you end up setting an FTP server on your home network )
It will do the job, just in the future keep that in mind. We suggest 30000 UDP because it's high and it's a private class.
View next topic View previous topic
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
)