Bridge.exe stuck at Search PSP USB Device

Kai Beginner Joined: 16 Jan 2011 Posts: 2

Hi guys please help,
I've followed all instructions to get this going , but I get stuck at the bridge.exe phase where it does not seem to detect the PSP.

I did all the steps exactly as the Win 7 32 bit guide says but the only problem comes when I use bridge.exe where it does not detect the PSP

my config is win 7 32 bit
psp is 5.50 GEN-D3 Prometheus 4
I do not use a router, I have checked, and it states Connected: Yes under game metrics

Please advice on the steps I can take

Kai Spammer Joined: 09 Jul 2010 Posts: 1436

Make sure you enabled the plug-in in your PSP, by going to the Recovery menu->Plugins, and if you have any other plug-ins running, disable them. Check the driver's status in Device manager, because the driver might be damaged.

Kai Beginner Joined: 16 Jan 2011 Posts: 2

I have no other plugins on, and I already activated adhoctousb plugin and also, the PSP type B driver says it is working properly.

Kai Spammer Joined: 09 Jul 2010 Posts: 1436

If you're using bridge v2, try using v1.