MN-700 router and WGA54g. not reachable, no conole.

Posted: Thu Nov 25, 2004 9:38 pm

Is your network reachable?
dono
Are you using a port-forward?
dono
Is your console being detected?
no
Brief description of your network setup:
linksys WGA54G (wireless) for my ps2 and a microsoft MN-700 wireless router for my computers and such
Do you use a software firewall? What brand? Have you made any changes to it?
yes. ez firewall. no
Operating System?
? windows 98
Problem description?
i cannot see the games do i need to do somthig whith my wireless system to be set up i saw somthing in my profile about wireless stuff but i have no idea what it is asking for

im usuing it for ps2 socomII

Posted: Thu Nov 25, 2004 11:14 pm

Quote:

i cannot see the games do i need to do somthig whith my wireless system to be set up i saw somthing in my profile about wireless stuff but i have no idea what it is asking for

Maybe that's why there's a Help button in the Kai Config Tool which explains all the options..

OK.

1. That's not a completed help request form.
2. In the Linksys WGA54G you could open the control panel for it (through a webbrowser), and change the MAC address of the WGA54G to be the exact same MAC address as the PS2.
3. If the PC is wireless to the MN-700 router, then you will need to make sure that the WLAN card inside the PC is indeed able to perform in promiscious mode. If it isn't, then you will need to run Kai on a hardwired PC.
4. You need to portforward on the MN-700 to the IP of the PC that runs Kai. You then enter the port you forward into 'Kai Port' in the Kai Config Tool (USE THE FAQ TO FIND OUT WHAT PORT AND HOW - http://www.teamxlink.co.uk/?go=faq section 2)

In fact had you followed the quickstart guide (step 5), you would have known about point 3 and 4 but I guess not Confused

Update: User did not respond within 5 days. Setting to Problem Solved.