Kai can not open

Kai Beginner Joined: 04 Feb 2012 Posts: 3

I am the first time run Kai 7.4.24, the engine is running,but i can't open http://127.0.0.1:34522,and i open the KaiUI.exe,it shows "loking for Kai engine",who can tell me what happen? Thanks.

Is your network reachable? yes
Are you using a router? yes
Did you set a static IP on the PC running Kai? yes
Did you forward port 30000 to the static IP? yes
Did you click the globe after forwarding to see if your network goes reachable? no
What console are you using? psp
Is your console being detected? no
Brief description of your network setup: psp and pc both wired to the same router, 192.168.0.111 for pc and 192.168.0.8 for xbox360
Model numbers of the router, and modem? router:tenda w307r,modem:tenda d820b
Do you use a software firewall? What brand? Have you made any changes to it? no
Operating System? windows xp sp3
Problem description? I can't open UI

# XLink Kai Engine Configuration
# Version 7.4.23

[KaiUserConfig]

# Username for automatic login
kaiUsername=!

# Password for automatic login
kaiPassword=!

# Use automatic login
kaiAutoLogin=0

# Use Web User Interface instead of GUI program
kaiWebUI=1

# Automatically launch Kai user interface
kaiLaunchUI=1

# User interface program name
kaiUI=kaiUI.exe

# Web UI Password
kaiHTTPPassword=!

# Web UI Skin
kaiSkin=!

# Automatically open chat
kaiAutoOpenChat=0

# Enable PSP Mode (Automatic SSID detection)
kaiPSPMode=0

# Disable sleep mode
kaiDisableSleep=0

# MBCS code page for asian character sets
kaiCodepage=936

# Language
kaiLanguage=zn

# Enable port address translation
kaiPAT=0

# Set UDP port for peer-to-peer connections (0=random)
kaiPort=30000

# Set UDP port for deep connections (0=disable)
# Do not enable this unless you are sure that you require deep resolution
kaiDeepPort=0

# Set TCP port for Web UI connections (connect with http://127.0.0.1:[portnumber]/)
# Default is 34522 - this does not need to be changed in most cases. You DO NOT need to forward this port in your router.
kaiWebUIPort=34522

# Use PSSDK or Winpcap
kaiLib=pssdk

# Autodetect Proxy Server
kaiProxyAutoDetect=1

# Proxy server IP address
kaiProxyServer=!

# Proxy server port
kaiProxyPort=0

# Network adapter (!=autodetect)
kaiAdapter=!

# Automatically shut down engine after x minutes (0=never)
kaiTimeout=0

# Automatically shut down engine when UI closes
kaiUIClose=1

# Accept connections from user interfaces on other computers
kaiAcceptRemote=0

Team XLink Moderator Joined: 27 Feb 2011 Posts: 1206

Have you tried using the KaiUI not the web browser one ? Change the value from
# Use Web User Interface instead of GUI program
kaiWebUI=1 to 0

Try another browser than your default one enter http://127.0.0.1:34522/config.htm to get to the config.

Kai Beginner Joined: 04 Feb 2012 Posts: 3

that's no change,when i open "kaiEngine.exe",it show me "the engine is started,and then i click "launch UI",it show me"looking for the kai engine..."on the top,i don't know haw long it takes to find it.

Team XLink Moderator Joined: 27 Feb 2011 Posts: 1206

It could be that some sort of security/privacy software causes this issue disable them and launch kai.

Kai Beginner Joined: 04 Feb 2012 Posts: 3

I have a new question,whether Kai supports Intel PRO/Wireless 2915ABG?