MHP3 unable to see people in guild

Kai Beginner Joined: 05 Jan 2012 Posts: 5

Is your network reachable? Yes
Are you using a port-forward? no
Is your console being detected? yes
Brief description of your network setup: Linksys WRT54G
Do you use a software firewall? What brand? Have you made any changes to it? Yes, it is on.Mcafee security center. no.
Operating System? Windows 7 64bit, sp1
Problem description?
Whenever i enter the online guild hall for MHP3, I cannot see anyone at all. One thing different is the bridge. Nowadays, whenever i use it, there is a high chance i would get the error: libusb0-dll, that liine... Even when it does not appear, i would still be unable to see anything.

# XLink Kai Engine Configuration
# Version 7.4.23

[KaiUserConfig]

# Username for automatic login
kaiUsername=*********

# Password for automatic login
kaiPassword=********

# Use automatic login
kaiAutoLogin=1

# Use Web User Interface instead of GUI program
kaiWebUI=1

# Automatically launch Kai user interface
kaiLaunchUI=1

# User interface program name
kaiUI=kaiUI.exe

# Web UI Password
kaiHTTPPassword=!

# Web UI Skin
kaiSkin=!

# Automatically open chat
kaiAutoOpenChat=1

# Enable PSP Mode (Automatic SSID detection)
kaiPSPMode=0

# Disable sleep mode
kaiDisableSleep=1

# MBCS code page for asian character sets
kaiCodepage=932

# Language
kaiLanguage=en

# Enable port address translation
kaiPAT=0

# Set UDP port for peer-to-peer connections (0=random)
kaiPort=30000

# Set UDP port for deep connections (0=disable)
# Do not enable this unless you are sure that you require deep resolution
kaiDeepPort=0

# Set TCP port for Web UI connections (connect with http://127.0.0.1:[portnumber]/)
# Default is 34522 - this does not need to be changed in most cases. You DO NOT need to forward this port in your router.
kaiWebUIPort=34522

# Use PSSDK or Winpcap
kaiLib=pssdk

# Autodetect Proxy Server
kaiProxyAutoDetect=1

# Proxy server IP address
kaiProxyServer=!

# Proxy server port
kaiProxyPort=0

# Network adapter (!=autodetect)
kaiAdapter=\Device\{FD5C4D81-FD01-495A-8471-E4CBE9AD8682}

# Automatically shut down engine after x minutes (0=never)
kaiTimeout=0

# Automatically shut down engine when UI closes
kaiUIClose=1

# Accept connections from user interfaces on other computers
kaiAcceptRemote=1

Team XLink Moderator Joined: 27 Feb 2011 Posts: 1206

Did you spoof your psps mac ? If yes here--> http://www.teamxlink.co.uk/forum/viewtopic.php?t=42661 or if that wont work here--> http://forums.exophase.com/showthread.php?t=19435

Kai Beginner Joined: 05 Jan 2012 Posts: 5

I first disabled the hide mac address thing, tried, saw no one.

then I tried the fix, but i didnt know whether i did it correctly as i could not connect to any wifi as my home network security is not supported.
But then i tried again, nothing... :/

thx alot for trying to help nonetheless!

Team XLink Moderator Joined: 27 Feb 2011 Posts: 1206

You have a libusb0.dll error here--> http://www.mediafire.com/?zrttl4tyt54 unzip and drag and drop onto the bridge.exe

Kai Beginner Joined: 05 Jan 2012 Posts: 5

Hey thx alot, i can now see people in the online guide!

Even though there is some error, but it works! THXXX!!!