xbox 360 no network found

Kai Beginner Joined: 08 Jul 2012 Posts: 3

Is your network reachable? Yes
Did you click the globe after forwarding to see if your network goes reachable? Yes
What console are you using? xbox 360
Is your console being detected? Yes
Brief description of your network setup: Two network cards
Operating System? XP
Problem description?

The xbox 360 is connected with two network cards to the pc, there is net on the xbox and ftp too. So i go to sign in to xlink kai, when i started the engine on pc and it says network not found. How do i solve it?

# XLink Kai Engine Configuration
# Version 7.4.24

[KaiUserConfig]

# Username for automatic login
kaiUsername=!

# Password for automatic login
kaiPassword=!

# Use automatic login
kaiAutoLogin=0

# Use Web User Interface instead of GUI program
kaiWebUI=1

# Automatically launch Kai user interface
kaiLaunchUI=1

# User interface program name
kaiUI=kaiUI.exe

# Web UI Password
kaiHTTPPassword=!

# Web UI Skin
kaiSkin=!

# Automatically open chat
kaiAutoOpenChat=0

# Enable PSP Mode (Automatic SSID detection)
kaiPSPMode=0

# Disable sleep mode
kaiDisableSleep=0

# MBCS code page for asian character sets
kaiCodepage=0

# Language
kaiLanguage=en

# Enable port address translation
kaiPAT=0

# Set UDP port for peer-to-peer connections (0=random)
kaiPort=30000

# Set UDP port for deep connections (0=disable)
# Do not enable this unless you are sure that you require deep resolution
kaiDeepPort=0

# Set TCP port for Web UI connections (connect with http://127.0.0.1:[portnumber]/)
# Default is 34522 - this does not need to be changed in most cases. You DO NOT need to forward this port in your router.
kaiWebUIPort=34522

# Use PSSDK or Winpcap
kaiLib=pssdk

# Autodetect Proxy Server
kaiProxyAutoDetect=1

# Proxy server IP address
kaiProxyServer=!

# Proxy server port
kaiProxyPort=0

# Network adapter (!=autodetect)
kaiAdapter=!

# Automatically shut down engine after x minutes (0=never)
kaiTimeout=0

# Automatically shut down engine when UI closes
kaiUIClose=1

# Accept connections from user interfaces on other computers
kaiAcceptRemote=0

Team XLink Moderator Joined: 27 Feb 2011 Posts: 1206

Have you enabled ICS (Internet Connection Sharing) ? Do you use FSD (Freestyle Dashboard) ?

Kai Beginner Joined: 08 Jul 2012 Posts: 3

Yes I use FSD, and i enabled ICS, cause there is internet on the xbox360.

Team XLink Moderator Joined: 27 Feb 2011 Posts: 1206

Set in your kai config under "default profiles" -- "Seperated Use - Engine PC" and "Allow Remote UI Connections". Enabling PAT or leaving it disabled might help you have to test it. This should make it work with FSD.

Kai Beginner Joined: 08 Jul 2012 Posts: 3

THX. It solved it.