PortForward Won't Work

Kai Beginner Joined: 30 Jul 2012 Posts: 1

Is your network reachable? No
Are you using a router? Yes Dlink
Did you set a static IP on the PC running Kai? Yes
Did you forward port 30000 to the static IP? Yes
Did you click the globe after forwarding to see if your network goes reachable? No
What console are you using? Xbox 360 Jtag
Is your console being detected? No
Brief description of your network setup: Dlink Router, Wireless
Model numbers of the router, and modem? Dlink DIR 655
Do you use a software firewall? What brand? Have you made any changes to it? I use firewall but it's disabled
Operating System? Windows XP
Problem description? I have port forwarded correctly I followed all the tutorials for port forwarding. Right port and ip and it's static. It just can't find the engine.

# XLink Kai Engine Configuration
# Version 7.4.24

[KaiUserConfig]

# Use automatic login
kaiAutoLogin=1

# Use Web User Interface instead of GUI program
kaiWebUI=0

# Automatically launch Kai user interface
kaiLaunchUI=1

# User interface program name
kaiUI=kaiUI.exe

# Web UI Skin
kaiSkin=!

# Automatically open chat
kaiAutoOpenChat=0

# Enable PSP Mode (Automatic SSID detection)
kaiPSPMode=0

# Disable sleep mode
kaiDisableSleep=0

# MBCS code page for asian character sets
kaiCodepage=0

# Language
kaiLanguage=en

# Enable port address translation
kaiPAT=1

# Set UDP port for peer-to-peer connections (0=random)
kaiPort=30000

# Set UDP port for deep connections (0=disable)
# Do not enable this unless you are sure that you require deep resolution
kaiDeepPort=0

# Set TCP port for Web UI connections (connect with http://127.0.0.1:[portnumber]/)
# Default is 34522 - this does not need to be changed in most cases. You DO NOT need to forward this port in your router.
kaiWebUIPort=34522

# Use PSSDK or Winpcap
kaiLib=pssdk

# Autodetect Proxy Server
kaiProxyAutoDetect=1

# Proxy server IP address
kaiProxyServer=!

# Proxy server port
kaiProxyPort=0

# Network adapter (!=autodetect)
kaiAdapter=!

# Automatically shut down engine after x minutes (0=never)
kaiTimeout=0

# Automatically shut down engine when UI closes
kaiUIClose=1

# Accept connections from user interfaces on other computers
kaiAcceptRemote=0

Also contact me:

Skype: cpaxe97
Aim: cpaxe97

The only way probably is someone to teamview with me that has smarts this seems to be a big problem.

Team XLink Moderator Joined: 27 Feb 2011 Posts: 1206

Have you checked if the port is actually open ?--> http://www.pcwintech.com/simple-port-tester Have you enabled upnp it should be under advanced settings ? Go to your router firewall settings and change udp endpoint filtering to endpoint independent.