FAQ  •  Search  •  Profile  •  Log in to check your private messages  •  Log in
 Kai Engine Frequently disconnects View next topic
View previous topic
Post new topicReply to topic
Author Message
goldeneye106
Kai Beginner
Kai Beginner


Joined: 13 Aug 2012
Posts: 27

PostPosted: Wed Aug 15, 2012 2:16 am Reply with quoteBack to top

[b]Is your network reachable? [Unknown]
[b]Are you using a router? [Unknown have DSL modem I believe]
[b]Did you set a static IP on the PC running Kai?[I set the IP address to 198.xxx.xx.xx based off of tutorial videos on youtube, and subnet mask 255.... These numbers were also shown on a different thread]
[b]Did you forward port 30000 to the static IP?[Unknown]
[b]Did you click the globe after forwarding to see if your network goes reachable?[No]
[b]What console are you using?[Xbox original]
[b]Is your console being detected? [Unknown]
[b]Brief description of your network setup:[Use airport on a mac for wireless internet. I allow internet sharing on my mac by ethernet cable to my xbox original]
[b]Model numbers of the router, and modem?[Unknown]
[b]Do you use a software firewall? What brand? Have you made any changes to it? [I use symantec for mac]
[b]Operating System? [Mac OSX 10.5.8]
[b]Problem description? [Frequently have to reload the kai internet page on my Safari browers

My kai engine frequently disconnects when using the kai engine program for mac. I am wondering whether there is an option I did not select.

Thank you for your time, patience and advice in helping me and other new users to Kai. We all appreciate the wonderful gaming environment set up here.
View user's profileSend private message
goldeneye106
Kai Beginner
Kai Beginner


Joined: 13 Aug 2012
Posts: 27

PostPosted: Wed Aug 15, 2012 2:49 am Reply with quoteBack to top

Yes the network is reachable. I just figured out how to check
View user's profileSend private message
giggyprince
Team XLink Moderator
Team XLink Moderator


Joined: 27 Feb 2011
Posts: 1206

PostPosted: Wed Aug 15, 2012 9:50 am Reply with quoteBack to top

You need to port forward port 30000 udp.
View user's profileSend private message
goldeneye106
Kai Beginner
Kai Beginner


Joined: 13 Aug 2012
Posts: 27

PostPosted: Wed Aug 15, 2012 1:03 pm Reply with quoteBack to top

Where and how can I change this on the Xlink Kai Configuration Tool? Or do I go somewhere else in Kai?

Or is this a physical change I need to make with my internet connection?

Thanks again
View user's profileSend private message
giggyprince
Team XLink Moderator
Team XLink Moderator


Joined: 27 Feb 2011
Posts: 1206

PostPosted: Wed Aug 15, 2012 1:18 pm Reply with quoteBack to top

You need to do the port forwarding in your internet router.
First you should set a statip IP for your Mac--> http://portforward.com/networking/static-Mac10.4.htm
This site can help you with forwarding ports--> http://portforward.com/english/routers/port_forwarding/routerindex.htm or use this tool here--> http://download.cnet.com/Lighthouse/3000-2651_4-127135.html
View user's profileSend private message
Display posts from previous:      
Post new topicReply to topic


 Jump to:   



View next topic
View previous topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


Powered by phpBB © 2001, 2002 phpBB Group :: Theme by Daz :: All times are GMT