Not Reachable, No Consoles detected

Kai Beginner Joined: 23 Sep 2012 Posts: 11

Is your network reachable? No
Are you using a port-forward? Yes
Is your console being detected? No
Brief description of your network setup: ZyXEL PK5001z DSL modem/router with computer and PS2 hardwired to modem
Do you use a software firewall? Turned off Firewall
Operating System? I'm on a MAC using parallels to run WindowsXP Pro + SP2
Problem description? Can't get network reachable or console detected... Followed to guide for port-forwarding exactly (actually retried it 3 times now) and also the set-up guide for Socom 2 that I found here in the forums..

[KaiUserConfig]
kaiPort=30000
kaiDeepPort=0
kaiAccept = Don't see this
kaiTimeout = Don't see
kaiNIC= Don't see
kaiLaunch= Don't see
kaiHomebrew=Don't see
kaiPAT=OFF
kaiAutoLogin=OFF
kaiWireless= Don't see
kaiUI=Web UI

Don't know if u need these but...
Web UI port = 34522
Pocket Capture Engine = PSSDK

?? is using a Virtual Machine possibly an issue or are there extra steps because i'm doing this?

Kai Beginner Joined: 20 Jun 2012 Posts: 48

i think i got this working, i tried with mac, and my network is reachable, and the console is detected

Team XLink Moderator Joined: 27 Feb 2011 Posts: 1206

Have you configured your routers firewall ? Disable stealth mode allow kai as service to pass the firewall and try different firewall security levels---> http://qwest.centurylink.com/internethelp/modem-pk5001z-adv-firewall.html

Kai Beginner Joined: 23 Sep 2012 Posts: 11

I will try that tonight when i get home from work. I feel like i'm closer just running kai in OSx though... I actually get network reachable and console detected doing it that way... i just can't see any games. I made separate post to see if anyone could help with that issue using OSx. But again i'll try this when i'm VM my windows xp tonight. Thanks! I'll let you know if it works

Kai Beginner Joined: 23 Sep 2012 Posts: 11

should i switch it to static ip's instead of dynamic since i created one when port-forwarding?