Author |
Message |
CrimsonCrap
Kai Beginner
Joined: 09 Nov 2012
Posts: 5
|
Posted:
Fri Nov 09, 2012 11:11 am |
|
Is your network reachable? Sometimes (I have same settings enabled but sometimes it connects at other times it does not.)
Are you using a router? No
Did you set a static IP on the PC running Kai? No
Did you forward port 30000 to the static IP? At this time,No (I tried forwarding this port once but to no avail.)
Did you click the globe after forwarding to see if your network goes reachable? I have UPnP enabled.Sometimes it says "Yes" and sometimes it says "Not Yet" (But when i forwarded port it sometimes went reachable and sometimes it said "Not Yet" aswell.)
What console are you using? PSP
Is your console being detected? Yes
Brief description of your network setup: Using AdHoc-to-USB to connect PSP to PC through USB cable and PC is connected to modem via WiFi.
Model numbers of the router, and modem? Modem:FiberHome AN1020-25
Do you use a software firewall? What brand? Have you made any changes to it? I have disabled all firewalls.
Operating System? Windows 7
Problem description? I have problems seeing everyone else's pings in WebUI.Even when my connection goes (Network Reachable:Yes) I still cannot see other people's ping in WebUI.When I turned on the standard UI that does not need a browser to run I saw that I could not establish a connection to any player even though it said in the UI that my connection was reachable.I have tried to turn off UPnP and forward port (30000) but it still does not work.I have tried almost every solution I could find but have had no progress.I have also tried connecting my PC to the Internet Modem via Ethernet cable because I read somewhere that Xlink Kai cannot fully run wireless but I had no progress with that method aswell.Help would be very much appreciated.
KAIUSERCONFIG
# Use automatic login
kaiAutoLogin=1
# Use Web User Interface instead of GUI program
kaiWebUI=1
# Automatically launch Kai user interface
kaiLaunchUI=1
# User interface program name
kaiUI=kaiUI.exe
# Web UI Password
kaiHTTPPassword=!
# Web UI Skin
kaiSkin=!
# Automatically open chat
kaiAutoOpenChat=1
# Enable PSP Mode (Automatic SSID detection)
kaiPSPMode=0
# Disable sleep mode
kaiDisableSleep=1
# MBCS code page for asian character sets
kaiCodepage=0
# Language
kaiLanguage=en
# Enable port address translation
kaiPAT=0
# Set UDP port for peer-to-peer connections (0=random)
kaiPort=0
# Set UDP port for deep connections (0=disable)
# Do not enable this unless you are sure that you require deep resolution
kaiDeepPort=0
# Set TCP port for Web UI connections (connect with http://127.0.0.1:[portnumber]/)
# Default is 34522 - this does not need to be changed in most cases. You DO NOT need to forward this port in your router.
kaiWebUIPort=34522
# Use PSSDK or Winpcap
kaiLib=winpcap
# Autodetect Proxy Server
kaiProxyAutoDetect=1
# Proxy server IP address
kaiProxyServer=!
# Proxy server port
kaiProxyPort=0
# Network adapter (!=autodetect)
kaiAdapter=!
# Automatically shut down engine after x minutes (0=never)
kaiTimeout=0
# Automatically shut down engine when UI closes
kaiUIClose=0
# Accept connections from user interfaces on other computers
kaiAcceptRemote=0 |
|
|
|
|
giggyprince
Team XLink Moderator
Joined: 27 Feb 2011
Posts: 1206
|
Posted:
Wed Nov 14, 2012 7:56 pm |
|
Have you done a portcheck to see if the port is really open ? Have you checked if your modem has built in security options like "Disable anonymous internet requests" ? Or block UDP ports ? |
|
|
|
|
CrimsonCrap
Kai Beginner
Joined: 09 Nov 2012
Posts: 5
|
Posted:
Fri Nov 16, 2012 4:23 am |
|
giggyprince wrote: |
Have you done a portcheck to see if the port is really open ? Have you checked if your modem has built in security options like "Disable anonymous internet requests" ? Or block UDP ports ? |
I have checked everything that you have suggested and there is no option that can be causing this. |
|
|
|
|
[1up]Stickey
Team XLink Administrator
Joined: 17 Dec 2007
Posts: 844
|
Posted:
Fri Nov 16, 2012 1:47 pm |
|
|
|
|
CrimsonCrap
Kai Beginner
Joined: 09 Nov 2012
Posts: 5
|
Posted:
Tue Nov 20, 2012 6:25 am |
|
Did what you asked.Still doesnt work :/
Also i read in a post somewhere that people sometimes get this problem for no reason.Any chance this might be a fault in Xlink Kai? |
|
|
|
|
giggyprince
Team XLink Moderator
Joined: 27 Feb 2011
Posts: 1206
|
Posted:
Tue Nov 20, 2012 10:05 pm |
|
Have you checked the modems security settings ? Maybe you need to "allow anonymous internet requests" or a different option to make it work. |
|
|
|
|
CrimsonCrap
Kai Beginner
Joined: 09 Nov 2012
Posts: 5
|
Posted:
Fri Nov 23, 2012 9:04 am |
|
giggyprince wrote: |
Have you checked the modems security settings ? Maybe you need to "allow anonymous internet requests" or a different option to make it work. |
I have checked every possible security setting on my modem(I dont use a router) and it still doesnt work.I am getting hopeless |
|
|
|
|
giggyprince
Team XLink Moderator
Joined: 27 Feb 2011
Posts: 1206
|
Posted:
Tue Nov 27, 2012 1:28 pm |
|
Have you tried to run kai with a disabled firewall just to test if it is causing the issue ? |
|
|
|
|
CrimsonCrap
Kai Beginner
Joined: 09 Nov 2012
Posts: 5
|
Posted:
Wed Nov 28, 2012 10:25 am |
|
giggyprince wrote: |
Have you tried to run kai with a disabled firewall just to test if it is causing the issue ? |
Done that aswell, Still does'nt work :/ |
|
|
|
|
giggyprince
Team XLink Moderator
Joined: 27 Feb 2011
Posts: 1206
|
Posted:
Sat Dec 01, 2012 1:36 pm |
|
Quote: |
Did you forward port 30000 to the static IP? At this time,No (I tried forwarding this port once but to no avail.) |
Have you tried to setup a static Ip for your computers network card that connects you to the internet and forward ports to it, like [1up]Stickey wrote ? |
|
|
|
|
|