fsd cant find xlink engine

Kai Beginner Joined: 11 Nov 2012 Posts: 2

Is your network reachable? according to 127.0.0.1:34552 it says "reachable: Not Yet"
Are you using a router? Yes. Motorola SBG6580
Did you set a static IP on the PC running Kai?Yes
Did you forward port 30000 to the static IP?Yes
Did you click the globe after forwarding to see if your network goes reachable? I have no idea what this means?
What console are you using?Xbox 360 Phat with FSD 3.0 Rev 63
Is your console being detected? No.
Brief description of your network setup:
Motorola SBG 6580 with Comcast Blast
Everything hard wired
firewall shut off on the router, shut down ADaware and Norton Security.
Model numbers of the router, and modem? Motorola SBG6580 gateway wireless router and modem in one
Do you use a software firewall? What brand? Have you made any changes to it? The router has a firewall, it is off
Norton Security Suite, currently disabled
Adaware, currently shut off
Operating System? Windows 7
Problem description?

I am trying to use xlink kai on FSD. I have followed the tutorial on the wiki on how to set up a static ip, i used portforward.org software that automatically set it to static, i went to router ip address and went to forwarding.
currently it is 192.168.0.150 (ip address the software set to static). 30000 is both start and end port. protocol both, enabled.

192.168.0.150, 34522 start port and end port, both protocol and enabled.

with xlink kai running, the freestyle dash settings have 150 set as the ip to connect to.
but no matter what i do it always says "Xlink Engine not found on network...

# XLink Kai Engine Configuration
# Version 7.4.24

[KaiUserConfig]

# Username for automatic login
kaiUsername= (hidden)

# Password for automatic login
kaiPassword= (hidden)

# Use automatic login
kaiAutoLogin=1

# Use Web User Interface instead of GUI program
kaiWebUI=1

# Automatically launch Kai user interface
kaiLaunchUI=1

# User interface program name
kaiUI=kaiUI.exe

# Web UI Password
kaiHTTPPassword=!

# Web UI Skin
kaiSkin=!

# Automatically open chat
kaiAutoOpenChat=1

# Enable PSP Mode (Automatic SSID detection)
kaiPSPMode=0

# Disable sleep mode
kaiDisableSleep=0

# MBCS code page for asian character sets
kaiCodepage=0

# Language
kaiLanguage=en

# Enable port address translation
kaiPAT=1

# Set UDP port for peer-to-peer connections (0=random)
kaiPort=30000

# Set UDP port for deep connections (0=disable)
# Do not enable this unless you are sure that you require deep resolution
kaiDeepPort=0

# Set TCP port for Web UI connections (connect with http://127.0.0.1:[portnumber]/)
# Default is 34522 - this does not need to be changed in most cases. You DO NOT need to forward this port in your router.
kaiWebUIPort=34522

# Use PSSDK or Winpcap
kaiLib=winpcap

# Autodetect Proxy Server
kaiProxyAutoDetect=1

# Proxy server IP address
kaiProxyServer=!

# Proxy server port
kaiProxyPort=0

# Network adapter (!=autodetect)
kaiAdapter=\Device\{B9456CAE-DBC2-41C4-849E-E4CF78ED1673}

# Automatically shut down engine after x minutes (0=never)
kaiTimeout=0

# Automatically shut down engine when UI closes
kaiUIClose=1

# Accept connections from user interfaces on other computers
kaiAcceptRemote=0

Kai Beginner Joined: 11 Nov 2012 Posts: 2

orbital name: Capital Orbital
reachable: Not Yet
local ip: (myip)
local port: 30000
engine version: 7.4.24
pssdk/winpcap: Windows/Winpcap
signed by: team xlink
ethernet adapter: No Traffic Yet
locked: 0
up engine traffic: 0
down engine traffic: 21
up chat traffic: 0
down chat traffic: 0
up orb traffic: 0
down orb traffic: 0
pssdk/winpcap (again?): Winpcap
mac cache entrie: 0
broadcast traffic inbound: 0
broadcast traffic outbound: 0
unicast traffic inbound: 0
unicast traffic outbound: 0
wireless SSID:

Found Consoles:

Team XLink Moderator Joined: 27 Feb 2011 Posts: 1206

First download the latest kai release its 7.4.26

Next set your config as in the pic--> http://img4.imageshack.us/img4/3006/7kaifsd.png this should do it.