Engine not found

Kai Beginner Joined: 01 Dec 2012 Posts: 2

Is your network reachable? yes
Are you using a router? yes, TP Link WR841ND
Did you set a static IP on the PC running Kai? yes
Did you forward port 30000 to the static IP? yes
Did you click the globe after forwarding to see if your network goes reachable? uh? the globe on the User Interface? yes..
What console are you using? X360
Is your console being detected? the console can't find the "engine"
Brief description of your network setup: PC connected via Lan to the router, Xbox via Lan to the router.
Model numbers of the router, and modem? TP Link WR841ND

Do you use a software firewall? What brand? Have you made any changes to it? Windows Firewall, all set correctly
Operating System? Win 7
Problem description? I followed many guides, but when I try to connect the Xbox on the FSD3, all I get is the message "can't find engine on the network". From the User Interface it seems like everything is set correctly.. I can see some users playing some games, even if it's a very small number of them (8 people playing Black Ops 2.. is that possible?)
KaiUserConfig:

# XLink Kai Engine Configuration
# Version 7.4.26

[KaiUserConfig]

# Username for automatic login
kaiUsername=!

# Password for automatic login
kaiPassword=!

# Use automatic login
kaiAutoLogin=1

# Use Web User Interface instead of GUI program
kaiWebUI=0

# Automatically launch Kai user interface
kaiLaunchUI=1

# User interface program name
kaiUI=kaiUI.exe

# Web UI Password
kaiHTTPPassword=!

# Web UI Skin
kaiSkin=!

# Automatically open chat
kaiAutoOpenChat=1

# Enable PSP Mode (Automatic SSID detection)
kaiPSPMode=0

# Disable sleep mode
kaiDisableSleep=0

# MBCS code page for asian character sets
kaiCodepage=0

# Language
kaiLanguage=en

# Enable port address translation
kaiPAT=1

# Set UDP port for peer-to-peer connections (0=random)
kaiPort=0

# Set UDP port for deep connections (0=disable)
# Do not enable this unless you are sure that you require deep resolution
kaiDeepPort=30000

# Set TCP port for Web UI connections (connect with http://127.0.0.1:[portnumber]/)
# Default is 34522 - this does not need to be changed in most cases. You DO NOT need to forward this port in your router.
kaiWebUIPort=34522

# Use PSSDK or Winpcap
kaiLib=pssdk

# Autodetect Proxy Server
kaiProxyAutoDetect=1

# Proxy server IP address
kaiProxyServer=!

# Proxy server port
kaiProxyPort=0

# Network adapter (!=autodetect)
kaiAdapter=\Device\{853A240B-182F-4494-9E7F-4895C52B2216}

# Automatically shut down engine after x minutes (0=never)
kaiTimeout=0

# Automatically shut down engine when UI closes
kaiUIClose=1

# Accept connections from user interfaces on other computers
kaiAcceptRemote=0

thanks!!

Team XLink Moderator Joined: 27 Feb 2011 Posts: 1206

Set your kai config as in the pic here--> http://img4.imageshack.us/img4/3006/7kaifsd.png this should make FSD and Kai work.

Kai Beginner Joined: 01 Dec 2012 Posts: 2

ok.. what about the IP addresses?
I've got the following:
Router -> 192.168.0.1
PC -> 192.168.0.100 (static)
X360 -> 192.168.0.10X

Then, on the Xbox, I've set "gateway" with the PC IP address.. is that correct?

and what about having 8 or 9 users online ONLY? isn't it a small number?

Team XLink Moderator Joined: 27 Feb 2011 Posts: 1206

Quote:

Then, on the Xbox, I've set "gateway" with the PC IP address.. is that correct?

The Gateway has to be the router ip in your case 192.168.0.1 you should give your 360 a static ip too.