Is your network reachable?
Not Yet
Are you using a router?
Its Wifi router.Inet gous there ?then via wifi it gous on my Pc and from there i connect Pc with xbox360
Did you set a static IP on the PC running Kai?
yes using program "Portforward Setup Static IP Address"
Did you forward port 30000 to the static IP?
yes
Did you click the globe after forwarding to see if your network goes reachable?
yes
What console are you using?
xbox360
Is your console being detected?
yes
Brief description of your network setup:
Its Wifi router.Inet gous there ?then via wifi it gous on my Pc and from there i connect Pc with xbox360
Model numbers of the router, and modem?
TP-Link,TL-WR340G
Do you use a software firewall? What brand? Have you made any changes to it?
no
Operating System?
WIn 7
Problem description?
network reachable.dont know what to do.i can connect to Xlink Kai on my xbox 360 in FSD but can not have my networ reachable say yes!
HELP Please!
# XLink Kai Engine Configuration
# Version 7.4.26
[KaiUserConfig]
# Username for automatic login
kaiUsername=dizaer
# Password for automatic login
kaiPassword=
# Use automatic login
kaiAutoLogin=1
# Use Web User Interface instead of GUI program
kaiWebUI=0
# Automatically launch Kai user interface
kaiLaunchUI=0
# MBCS code page for asian character sets
kaiCodepage=0
# Language
kaiLanguage=en
# Enable port address translation
kaiPAT=0
# Set UDP port for peer-to-peer connections (0=random)
kaiPort=30000
# Set UDP port for deep connections (0=disable)
# Do not enable this unless you are sure that you require deep resolution
kaiDeepPort=0
# Set TCP port for Web UI connections (connect with http://127.0.0.1:[portnumber]/)
# Default is 34522 - this does not need to be changed in most cases. You DO NOT need to forward this port in your router.
kaiWebUIPort=34522
# Use PSSDK or Winpcap
kaiLib=pssdk
# Autodetect Proxy Server
kaiProxyAutoDetect=1
# Proxy server IP address
kaiProxyServer=!
# Proxy server port
kaiProxyPort=0
# Network adapter (!=autodetect)
kaiAdapter=!
# Automatically shut down engine after x minutes (0=never)
kaiTimeout=0
# Automatically shut down engine when UI closes
kaiUIClose=0
# Accept connections from user interfaces on other computers
kaiAcceptRemote=1
Lionheart Team XLink Administrator
Joined: 05 May 2008
Posts: 1499
Posted:
Sat Feb 09, 2013 3:44 pm
try this:
1. Set kai port and kai deep port to 0 (kai config.)
2. keep enable PAT
after that just browse across arenas and check if change to YES
View next topic View previous topic
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum