Is your network reachable? Yes.
Are you using a router? Nope.
Did you set a static IP on the PC running Kai? I don't know.
Did you forward port 30000 to the static IP? Nope.
Did you click the globe after forwarding to see if your network goes reachable? /
What console are you using? I don't know.
Is your console being detected? I don't think so...
Brief description of your network setup: /
Model numbers of the router, and modem? /
Do you use a software firewall? What brand? Have you made any changes to it? Nope.
Operating System? /
Problem description? Just this : can't read value of 'hkcr http shell open ddeexec topic'
--->
# XLink Kai Engine Configuration
# Version 7.4.26
[KaiUserConfig]
# Username for automatic login
kaiUsername=
# Password for automatic login
kaiPassword=
# Use automatic login
kaiAutoLogin=1
# Use Web User Interface instead of GUI program
kaiWebUI=1
# Automatically launch Kai user interface
kaiLaunchUI=1
# MBCS code page for asian character sets
kaiCodepage=0
# Language
kaiLanguage=en
# Enable port address translation
kaiPAT=0
# Set UDP port for peer-to-peer connections (0=random)
kaiPort=30000
# Set UDP port for deep connections (0=disable)
# Do not enable this unless you are sure that you require deep resolution
kaiDeepPort=30000
# Set TCP port for Web UI connections (connect with http://127.0.0.1:[portnumber]/)
# Default is 34522 - this does not need to be changed in most cases. You DO NOT need to forward this port in your router.
kaiWebUIPort=34522
View next topic View previous topic
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum