Network Reachable: Not Yet

Kai Beginner Joined: 15 Apr 2013 Posts: 2

Is your network reachable? No
Are you using a router? Yes
Did you set a static IP on the PC running Kai? Yes
Did you forward port 30000 to the static IP? Yes
Did you click the globe after forwarding to see if your network goes reachable? Yes
What console are you using? Xbox 360
Is your console being detected? No
Brief description of your network setup: Modem into router, connected to Xbox and PC
Model numbers of the router, and modem? Router: Linksys E4200 V2, Modem: Actiontec V1000H
Do you use a software firewall? What brand? Have you made any changes to it? Windows Firewall, I've allowed full access to UI and Engine, also I've disabled it all together
Operating System? Windows 8 64bit
Problem description? Can't get Xlink to connect to the network, I've tried all sorts of different ports, I tried using my Linksys router and opened the ports on there, I plugged in to the Actiontec one and opened ports on there, I've disable the Windows firewall, nothing helps, I am at a total loss.

# XLink Kai Engine Configuration
# Version 7.4.26

[KaiUserConfig]

# Username for automatic login
kaiUsername=

# Password for automatic login
kaiPassword=

# Use automatic login
kaiAutoLogin=1

# Use Web User Interface instead of GUI program
kaiWebUI=0

# Automatically launch Kai user interface
kaiLaunchUI=1

# User interface program name
kaiUI=kaiUI.exe

# Web UI Password
kaiHTTPPassword=!

# Web UI Skin
kaiSkin=!

# Automatically open chat
kaiAutoOpenChat=1

# Enable PSP Mode (Automatic SSID detection)
kaiPSPMode=0

# Disable sleep mode
kaiDisableSleep=0

# MBCS code page for asian character sets
kaiCodepage=0

# Language
kaiLanguage=en

# Enable port address translation
kaiPAT=0

# Set UDP port for peer-to-peer connections (0=random)
kaiPort=30000

# Set UDP port for deep connections (0=disable)
# Do not enable this unless you are sure that you require deep resolution
kaiDeepPort=0

# Set TCP port for Web UI connections (connect with http://127.0.0.1:[portnumber]/)
# Default is 34522 - this does not need to be changed in most cases. You DO NOT need to forward this port in your router.
kaiWebUIPort=34522

# Use PSSDK or Winpcap
kaiLib=pssdk

# Autodetect Proxy Server
kaiProxyAutoDetect=1

# Proxy server IP address
kaiProxyServer=!

# Proxy server port
kaiProxyPort=0

# Network adapter (!=autodetect)
kaiAdapter=\Device\{84194B94-23C7-460C-A27F-D0942768C8C7}

# Automatically shut down engine after x minutes (0=never)
kaiTimeout=0

# Automatically shut down engine when UI closes
kaiUIClose=1

# Accept connections from user interfaces on other computers
kaiAcceptRemote=0

Team XLink Moderator Joined: 27 Feb 2011 Posts: 1206

Have you checked the routers firewall options ? I suggest just as a test to disable the router firewall and see if kai gets reachable. If thats the case then youll have to tweak your routers firewall settings.

Kai Beginner Joined: 15 Apr 2013 Posts: 2

yeah I killed the firewall too to try that, still no go. if it makes any difference, when I check to see if the port is open using any port checker site, it says 30000 is closed, but the port that uTorrent is set to reports as open. If I change the default port in uTorrent to something else, apply, and check that port again, it also reports as open, even if I set it to 30000. What uTorrent does to open that port I have no idea, it's obviously not my routers problem though as I can clearly use websites, my PS3 connects to the internet, uTorrent works just fine, along with everything else. I'm assuming that the port stays locked until it is in use??? When I close uTorrent the port closes again, which is why port 30000 is always closed since Xlink isn't connecting. I am stumped.

Team XLink Moderator Joined: 27 Feb 2011 Posts: 1206

Quote:

Model numbers of the router, and modem? Router: Linksys E4200 V2, Modem: Actiontec V1000H

It looks to me like youre having two routers wired together or are you just using one device, if yes which one would that be ?
Have you tried to enable upnp on both devices ? Instead of port forwarding you have to do port triggering if you use both devices.