Not reachable

Kai Beginner Joined: 20 Jan 2014 Posts: 1

Is your network reachable? No.
Are you using a router? Yes.
Did you set a static IP on the PC running Kai? Yes.
Did you forward port 30000 to the static IP? Yes.
Did you click the globe after forwarding to see if your network goes reachable? Yes.
What console are you using? PSP.
Is your console being detected? Yes.
Brief description of your network setup: PC connected to router wirelessly, PSP connected to Asus USB-N10 adapter.
Model numbers of the router, and modem? Router: Technicolor TC8305C.
Do you use a software firewall? What brand? Have you made any changes to it? No.
Operating System? Windows 7 32-bit
Problem description? Metrics says my network is not reachable. Port 30000 is open, I checked.

Code:

# XLink Kai Engine Configuration
# Version 7.4.26

[KaiUserConfig]

# Use Web User Interface instead of GUI program
kaiWebUI=1

# Automatically launch Kai user interface
kaiLaunchUI=1

# User interface program name
kaiUI=kaiUI.exe

# Web UI Password
kaiHTTPPassword=!

# Web UI Skin
kaiSkin=!

# Automatically open chat
kaiAutoOpenChat=1

# Enable PSP Mode (Automatic SSID detection)
kaiPSPMode=0

# Disable sleep mode
kaiDisableSleep=1

# MBCS code page for asian character sets
kaiCodepage=0

# Language
kaiLanguage=en

# Enable port address translation
kaiPAT=0

# Set UDP port for peer-to-peer connections (0=random)
kaiPort=30000

# Set UDP port for deep connections (0=disable)
# Do not enable this unless you are sure that you require deep resolution
kaiDeepPort=0

# Set TCP port for Web UI connections (connect with http://127.0.0.1:[portnumber]/)
# Default is 34522 - this does not need to be changed in most cases. You DO NOT need to forward this port in your router.
kaiWebUIPort=34522

# Use PSSDK or Winpcap
kaiLib=pssdk

# Autodetect Proxy Server
kaiProxyAutoDetect=1

# Proxy server IP address
kaiProxyServer=!

# Proxy server port
kaiProxyPort=0

# Network adapter (!=autodetect)
kaiAdapter=\Device\{EB1BFB44-A1F5-4B4A-BA35-A30CA7A8B07F}

# Automatically shut down engine after x minutes (0=never)
kaiTimeout=0

# Automatically shut down engine when UI closes
kaiUIClose=0

# Accept connections from user interfaces on other computers
kaiAcceptRemote=0

Kai Regular Joined: 02 Jun 2012 Posts: 87

May sound stupid, but can you confirm you port forwarded port 30000 UDP on the computer that's running XLink Kai?

Also if you did not want to port forward you can try port 0 for UDP port.

Kai Beginner Joined: 05 Apr 2014 Posts: 2

Perhaps the set up directions should have specified UDP. I only saw this here after a lot of digging.