Joined: 13 Dec 2004
Posts: 8
Location: USA - Arizona
Posted:
Sun Jan 16, 2005 12:39 pm
xbmc-2005-01-02 and just downloaded xlinkkaievo7 - WindowsXP version
Using port 30000, forwarded to PC.
Setup Kai as normal and I can connect properly on the PC.
Setup Kai as engine only. when attempting to connect through XBMC I get username/password rejected by obital server.
I tried changing all the settings in the Kai config including changing to all of the recommended ports. But I could never get Kai to connect through the XBMC.
The only way I found to connect through XBMC is to setup Kai as normal (except never close engine) and then tell XBMC to connect. The GUI on the PC disappears and everything then works through the XBMC. It looks like since the GUI logs me in and I keep the engine from closing. I am then able to run Kai from the XBMC.
This works but I am stumped as to why I can't get it to work as an engine only.
TheDaddy
Joined: 30 Jul 2006
Posts: 0
Posted:
Sun Jan 16, 2005 12:50 pm
2 choices,
1.) Put your username+pass into kaiConfig on the PC, tick AutoLogin..
2.) Add your username+password to XBMC - you can put it into the config in XBMC's UI.
TD
dfunked Team XLink Administrator
Joined: 25 Apr 2004
Posts: 7005
Location: Australia - VIC
Posted:
Sun Jan 16, 2005 12:58 pm
100% sure you've entered them in right in the settings in XBMC? No extra spaces or whatever? Case sensitive password remember..
_________________
skubacb Kai Beginner
Joined: 13 Dec 2004
Posts: 8
Location: USA - Arizona
Posted:
Sun Jan 16, 2005 3:59 pm
Sure on the name & password.
When it didn't work I did it very carefully three times with the same results.
Right now the same name and PW are in XBMC and on the PC.
I will try to do some more reading. I must have done something wrong. But I sure don't know what.
View next topic View previous topic
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum